FS Cap banks

[m4a1usr]

Got a few cap banks that I built up last summer and these are the leftovers. Thought I was going to use them but its been many months, still they sit. Guess its time to clear off the work bench. Theres 6 complete cap banks. I will describe them per the pic so I hope its clear. PM me if not.

Top left bank in picture is a used one that came with a CC240LV I purchased. I didnt like the size of it so I made a smaller one. Works perfectly. Built like a tank but not by me. Has six 680mfd 50v caps.

Bank next to it has no wiring attached. Just two 470mfd 50v caps glued together. Used but works fine.

Middle left bank is made from four 1000mfd 50v caps. New never installed

Middle right bank is made from three 1000mfd 50v caps. New never installed

Bottom left bank is made from five 1000mfd 50v caps. New never installed

Bottom right bank is made from six 470mfd 50v caps. New never installed

All are made from the highest quality Rubycon ZLH ultra low ESR caps money can buy. These would all be great additions to those lacking tools or ability to manufacture.

All items have been SOLD!

John



http://i1009.photobucket.com/albums/af218/m4a1usr/DSCN2079.jpg?t=1299441947

[tarnold69]

yes i built that one like a tank i seen what it was purchased it with and when you said built like a tank that sounds like the one i built man i have so many caps laying around from 6.3 v to 200v its about the size of that cap bank i built but its 1 cap my hobbyroom they are coming out my ears i am a systems integrater and befor i throw away old electronic i feildsstrip them of fans caps resistors switches anyway its just cool seing something you built on line good luck.

[Karfrik]

if you are willing to separate,then i need one for a 200a suppo esc.Which one would you recommend and how much shipped conus?....Thanks,...Al

[sailr]

I'll take 'em all for $45. Send me your paypal.

[tarnold69]

i did not post that to sell off of his post any thing he has abolve will work for a 200 amp esc it just depends on your voltage that one that i biult above would handle anything you could throw at it it has 50v caps 6 680uf so 50v 4080 uf 10 gage wire under it that will handle 12 or 13cell lipo and all the storage you will ever need and then some that one would be perfect fo you in fact i really was not trying to sell anything just comenting on something i built sorry, i recomend that top one the 50v 4080uf 10gage wire double heat shrink 6 caps total

[m4a1usr]

if you are willing to separate,then i need one for a 200a suppo esc.Which one would you recommend and how much shipped conus?....Thanks,...Al

Al,

Send me a PM and I can set you up with something that will work. $10 shipped

John

[m4a1usr]

I'll take 'em all for $45. Send me your paypal.

Jim,

I will send you out a PM. They are yours if you want them.

John

[sailr]

$45 paypal sent! Thanks. Please mark sold.

[m4a1usr]

PM's sent to all. Thanks for your patience! Items shipped today!

John