PDA

View Full Version : Prince 25" mono


blackcat26
02-23-2011, 07:30 PM
Got a beautiful condition hull and hardware for sale here. Boat is in perfect condition with no scratches that I can see on it. Comes with speedmaster strut and rudder and turn fins and skid plates or whatever you call em. Has .150 flex/stub with it and no stinky teflon liner just brass stuffing tube. Kevlar/carbon floor and servo included. The canopy was half azz painted and prolly needs to be touched up (the black only). This boat has almost seen 50mph and ran great. Everything in pictures shown other than boat stand.
Axing $105 shipped in the US.
CaptPJB
02-23-2011, 07:41 PM
What sized motor is that mount suited for?

Peter
blackcat26
02-23-2011, 07:48 PM
I ran a 36mm dia. 50mm long and that motivated the boat well even with 2 2s batteries on board.
JackBlack26
02-23-2011, 07:57 PM
I'll take it! Paypal to the same address as the motor, right?
blackcat26
02-23-2011, 08:00 PM
Yup same one.
JackBlack26
02-23-2011, 08:08 PM
You have cash! Thanks again bro.:beerchug:
blackcat26
02-23-2011, 08:11 PM
Got it. Thanks. Will got out hopefully tomorrow my man.
JackBlack26
02-23-2011, 08:14 PM
:thumbup:
Diesel6401
02-23-2011, 08:18 PM
Damn that was fast! Good buy JackBlack and nice looking boat BC26 (you do awesome CF work!)
blackcat26
02-23-2011, 08:25 PM
Thanks Dale. The boat is super nice and has a new home now!
JackBlack26
03-02-2011, 01:00 PM
Got the boat today! Thanks so much for the awesome deal. I'm going to run the 2600 I got from you in it on 4S with a 40mm prop to start and see how she goes.

I'm sorry that you have to get out of the hobby but understand you situation. I wish you nothing but the best as you try and move on with your life after such a huge loss. Stay strong and positive brother.:smile:
blackcat26
03-02-2011, 07:09 PM
Good deal bro. Treat her well!
Brushless55
03-02-2011, 07:59 PM
great deal there!!
JackBlack26
03-02-2011, 08:20 PM
I will treat it with lots of respect, as you did BC.

Got to run her today on 2s, 2P with the 2600, 125a Supo ESC out of the Gen. and a 40mm prop and she scooted along pretty well. Very, very impressed!! When I configured the packs for 4s the drive dog set screw loosened up and it only went about 10 feet. It was my fault for not using enough lock tight on the grub screw after adjusting it. Over all, this little guy is a winner! I'm so happy with this purchase!!

Thanks again :beerchug:
blackcat26
03-02-2011, 08:57 PM
Good! It's funny how this was my least expensive boat I owned and I enjoyed driving it the most......