keithbradley
02-23-2011, 07:10 PM
Putting up my Smith's cat for sale. This was my first build. This is a German hull and has a very unique look to it. Better paint and a brighter color (along with a windsheild stickered or painted on) would do it more justice.
I parted out some of what was in her, here's what I have left:
(2) counter rotating flexes(.150")
(2) 5mm to .150 collets
(1) Speedmaster rudder, modded for snow use. Shorter length from top to bottom and larger from the leading edge to trailing edge (pictured)
(1) Interchangable speedmaster rudder, stock for water use.
(2) supervee struts, machined to be straight for twin use
(1) AceRC servo, mounted with linkage attached.
I sprayed some paint on the inside when building it just to see what it looked like and never got around to really painting it, thats why it's that ugly green. Painting it black would dramatically improve the appearance IMO.
I'll sell it as hull/hardware with flexes, collets, rudders, servo, motor mounts, ect for $120 shipped CON US
Or bare hull (will have stuffing tubes still, they could be cut out if you want to build it as a single or left in there for twin use). Motor mounts will also stay with the boat (simple aluminum mounts)
$60 shipped CON US
http://i624.photobucket.com/albums/tt328/keithbradley/100_1989.jpg
http://i624.photobucket.com/albums/tt328/keithbradley/100_2153.jpg
http://i624.photobucket.com/albums/tt328/keithbradley/100_2151.jpg
I parted out some of what was in her, here's what I have left:
(2) counter rotating flexes(.150")
(2) 5mm to .150 collets
(1) Speedmaster rudder, modded for snow use. Shorter length from top to bottom and larger from the leading edge to trailing edge (pictured)
(1) Interchangable speedmaster rudder, stock for water use.
(2) supervee struts, machined to be straight for twin use
(1) AceRC servo, mounted with linkage attached.
I sprayed some paint on the inside when building it just to see what it looked like and never got around to really painting it, thats why it's that ugly green. Painting it black would dramatically improve the appearance IMO.
I'll sell it as hull/hardware with flexes, collets, rudders, servo, motor mounts, ect for $120 shipped CON US
Or bare hull (will have stuffing tubes still, they could be cut out if you want to build it as a single or left in there for twin use). Motor mounts will also stay with the boat (simple aluminum mounts)
$60 shipped CON US
http://i624.photobucket.com/albums/tt328/keithbradley/100_1989.jpg
http://i624.photobucket.com/albums/tt328/keithbradley/100_2153.jpg
http://i624.photobucket.com/albums/tt328/keithbradley/100_2151.jpg