wetsleeves
02-18-2011, 08:16 AM
Hi,
I would like to try the leopard 4082 1030kv motors on 10s in my mystic 44.8 inch cat. I wanted to know if my castle 120HV esc would be ok. The cat is a twin set up running NEU 1912- 825kv but I have a tendency of breaking flex cables with these motors when I prop up.
If I need new esc I might try 4080 2000kv on 5s with 180-200 amp esc.
My packs are thunderpower 30c 5000mah 5s packs (4batteries in total). 2 packs are ran in series (creating a 10s pack) then paralleled to each other.
What are your thoughts?
Thanks Peter
I would like to try the leopard 4082 1030kv motors on 10s in my mystic 44.8 inch cat. I wanted to know if my castle 120HV esc would be ok. The cat is a twin set up running NEU 1912- 825kv but I have a tendency of breaking flex cables with these motors when I prop up.
If I need new esc I might try 4080 2000kv on 5s with 180-200 amp esc.
My packs are thunderpower 30c 5000mah 5s packs (4batteries in total). 2 packs are ran in series (creating a 10s pack) then paralleled to each other.
What are your thoughts?
Thanks Peter