PDA

View Full Version : Product Review Monojeff Wrap w/pics



gizmo1
02-14-2011, 04:12 PM
To the mods, sorry if this is in the wrong place, i did not see any place for product reviews ???


1st i want to say thanks to Jeff, he did a great job on the wrap and he offers very good commnuication and customer service.

Ok here we go, i contacted jeff a few weeks back with just an idea in my head, he took the idea and ran with it. the end results are amazing.
His design was spot on and the material used are absolutely the best. i have never installed a wrap on anything and after a phone conversation he convinced me i could do it.
I must say i was a bit worried, hell scared, to attempt this but once i got going it all fell into place, again i give Jeff props for the in depth instructional phone conversation.
The vinyl he uses is very forgiving and suprisingly easy to work with, a stretch here, a tug there, a few strategic cuts here and there, and a little well placed heat from a blow dryer and i was done.
Another very nice thing about this wrap was if i did screw up, and i did, it is very easy to patch in a piece to cover it or correct it. this will also come in handy if i ever damage the wrap, just save the scraps and piece it in as needed

on a difficulty scale , as a 1st time experience with a wrap, 1-10, ten being frustrted and throwing it away..lol , i give this a 3...

As far as pricing, i have spent much,much more on a plain jane paint job, and the end result was nowhere near as nice. the total cost of this wrap on a 29" Skunkworks cat was $ 80.00 shi[[ed to my door priority mail, and that included the seperate " High Voltage " vinyl graphics...

If you guys had reservations in the past about a wrap i can tell you just let r dig..its' not bad and it's relativly inexpensive.

Give Jeff a shout, he goes by monojeff here on the forum

thanks,
Giz.

Now the pics

http://i588.photobucket.com/albums/ss323/gizmo1_photos/highvoltagecat005.jpg

http://i588.photobucket.com/albums/ss323/gizmo1_photos/highvoltagecat004.jpg

http://i588.photobucket.com/albums/ss323/gizmo1_photos/highvoltagecat003.jpg
http://i588.photobucket.com/albums/ss323/gizmo1_photos/highvoltagecat002.jpg

http://i588.photobucket.com/albums/ss323/gizmo1_photos/highvoltagecat001.jpg

Brushless55
02-14-2011, 05:04 PM
That looks cool man!

monojeff
02-16-2011, 07:16 PM
Appreciate the GREAT review.
Looks like you did a nice job on the install!

Came out just as planned. :thumbup1:

Peregrine
07-22-2011, 11:04 PM
I'm curious, how has the wrap held up? Have you run the boat much since you wrapped it? Any further insights on how it has worked out, would you do it again?

gizmo1
07-31-2011, 08:26 PM
I'm curious, how has the wrap held up? Have you run the boat much since you wrapped it? Any further insights on how it has worked out, would you do it again?

I did not get a chance to run that boat. I sold it to another forum member, before i could.

I will say a few more things about Jeff's work though, as he is currently working some projects for me.

1st- off he uses nothing but high end material that is very easy to work with, and should last a very long time.

2nd- he always answers his emails,texts,etc. in a timely fashion, which is worth alot , considering he does have a full time real job.

3rd -if his wraps will withstand the beatings that are dished out on the HPI Baja's he has done work on i think there would be no issues on the boats.
lastly- to answer the question would i do a wrap from Jeff again ? Yes, no question, as a matter of fact he is just about done with the proofs for my latest project i sent his way, and true to form he has been nothing but professional since the start, and even managed to work in a small set of graphics, for another boat of mine, in between, all in his " spare time ".

i hope this helps and if you have any questions just drop me a line.
Giz.