OSE 40mm x 74mm motors

[Steven Vaccaro]

OSE branded 40mm x 74mm motors. 2364kv 5mm shaft with 5.5mm bullet connectors. 13 ounces

I have 5 test samples. First 5 people(with paypal) get them at my cost plus shipping. $50 each.

Just post on this thread that you would like one and then we can work out payment details.

[m4a1usr]

You got it. Post a link or however you want for the buy. Nice deal Steve and they are the "boat" version. Thanks, John

[tiqueman]

Im in Steven. Awesome!

Paypals ready when you are sir!

[RCKong]

I'll take one too !

[tiqueman]

I'll take one too !

Brian.. Nice!!!!! :buttrock:

[RCKong]

Scott - Thanks for the heads up...:beerchug:

[tiqueman]

Dont thank me, thank Mr Vaccaro!

[RCKong]

Him too !!!:rockon2:

[egneg]

I will take one as well!

[osprey21]

I'll take one too.

[tunnelvision]

I'll take one if you got one left.

[Jeff Wohlt]

Where's the coool Logo? :) Brand that baby, Steven!

Is this a max 4S motor with that KV?

[m4a1usr]

OSE branded 40mm x 74mm motors. 2364kv 5mm shaft with 5.5mm bullet connectors. 13 ounces

I have 5 test samples. First 5 people(with paypal) get them at my cost plus shipping. $50 each.

Just post on this thread that you would like one and then we can work out payment details.

Paypal ready. Havent heard a word yet.

John

[egneg]

I'm waiting to hear as well.

:popcorn2:

[tiqueman]

Me too... :popcorn2:

[Brushless55]

I dig the blue!
this could be a sweet motor on 4s for my Revo :cool2:
If there is one left, I will take it and try it out in my revo....

[Steven Vaccaro]

m4a1usr, tiqueman, RCKong, egneg, osprey21.

Ok I have one for each of you guys. Look for a pm.

[m4a1usr]

Money sent. Thanks Steve!

John

[tiqueman]

Money sent. Thank you Steven!

[egneg]

Payment sent - thanks Steven. :banana:

[osprey21]

Funds sent. Thank you, sir!

[Steven Vaccaro]

Chris, John and Scott, you guys all paid but I can not print shipping labels with the way you guys made the payment. I've refunded the payments. Please make the payment using "goods" as the items, so I'm able to print the labels for shipping.

[tiqueman]

Re-sent (Goods)

[RCKong]

Payment sent .
Thanks,
RCK

[m4a1usr]

Sorry about that Steve. Money sent as requested.

John

[egneg]

Looks like I will get mine first. :Shame_on_You:

[tiqueman]

Looks like I will get mine first. :Shame_on_You:

I bet we all sent as "gift" to try to save Steven a few coins... CHUCK! :laugh:

Dont you have some props to balance or something... wait, I need to send you some props... are they done yet?! :ohmy:

[Diesel6401]

Awesome deal guys. Steve is something we can expect to see in the store soon?

[egneg]

I bet we all sent as "gift" to try to save Steven a few coins... CHUCK! :laugh:

Dont you have some props to balance or something... wait, I need to send you some props... are they done yet?! :ohmy:

What Props? And how did you want them ... mangled?

:sarcasm1:

[Diesel6401]

What Props? And how did you want them ... mangled?

:sarcasm1:

If any of you guys want to pass that motor a long, I would gladly take it off you hands :Praying:

Chuck I also sent you a prop for mangling... Not sure if you got it yet...

[ray schrauwen]

OSE branded 40mm x 74mm motors. 2364kv 5mm shaft with 5.5mm bullet connectors. 13 ounces

I have 5 test samples. First 5 people(with paypal) get them at my cost plus shipping. $50 each.

Just post on this thread that you would like one and then we can work out payment details.

Why this Kv number?

[tiqueman]

What Props? And how did you want them ... mangled?

:sarcasm1:

Like I would expect it any differently :thumbup:



Why this Kv number?

I thought it was an odd KV too, kinda in the middle of 3 and 4S. But I think in the right hull w/ the right prop, it should be a fun 4S deal.

[Steven Vaccaro]

Why this Kv number?

It's what they had in stock. I'm working on other kv's

[RCKong]

any other specs on it ?

[osprey21]

Funds re-sent as requested.

[andym]

MMM you guys do no about Chucks home made balancer don't you?? He sends them to Douggie to spin up on his 3/16 wiener !!

[Eodman]

They fit his Dachsund --- didnt know he had a dog!

[Steven Vaccaro]

All motors have shipped, thanks.
Let me know how you guys like these?

I have more coming. But because of the Holiday is Asia its going to be about 6 weeks.

[egneg]

Thanks Steven ... can't wait to try it out.

P.S. Please disregard all posts by jealous trouble makers.

[egneg]

Motor came today. Correct me if I am wrong but it appears to be a 6 pole motor with very strong magnets - very hard to turn by hand. Should be a good motor at the stated KV. I like that it has 6 tapped holes on the front plate for more mounting options. :rockon2:

[ray schrauwen]

Awe Jeese, now I wish I got one of those for $50.... Darn...

[Brushless55]

Awe Jeese, now I wish I got one of those for $50.... Darn...

I tried.... :crying:

[ray schrauwen]

I wouldn't be able to test it for Steve until Spring anyway....

[Brushless55]

I wouldn't be able to test it for Steve until Spring anyway....

I would throw it in my Revo right now on 4s! :rockon2:
http://i703.photobucket.com/albums/ww39/filmmaker2009/122.jpg

[RCKong]

It will be a nice fit in my new DF29...

[Steven Vaccaro]

It will be a nice fit in my new DF29...

Should good like stink in that hull

[tiqueman]

Got it today Steven. Thanks again.. had I only thought to ask if I could add a cooling jacket to the purchase... I ordered one yesterday from you. :doh: Im polish, whada ya want! :laugh:

[m4a1usr]

Picked up the motor today from the post office. Looks great. Packaged just like the Keda's? Interesting. Like George stated. Wow. Powerfull magnets. Ran it on the bench on 4S for just a brief moment. Awesome. The Leopard cooling jacket fits fine as well as the Neu 1515 jacket. I like the 5.5 bullets. Made things simple. I think the LBA 4074 now in the UL1 is going to be replaced. Should have some data in the next month. I'm back on the east coast in a week.:mad:

John

[RCKong]

Thanks Steven, I got mine today also. It would be nice to have some specs on this motor besides just Kv. How many poles, amp draw, watts ? Will a 120A controller be enough ?

[Brushless55]

So I hear these are not Leopard motors, I thought by the looks they were...
maybe a Keda? :confused2:
.
.
.

[ray schrauwen]

Possibly the same manufacturer as this motor:


Hobby King sells this and it is supposed to be a knock off of some other brand as seen in the comments section. Great price at hoby king but, it's only a 68mm motor... still a 6 pole torque monster motor.

[m4a1usr]

So I hear these are not Leopard motors, I thought by the looks they were...
maybe a Keda? :confused2:
.
.
.

The front motor plate on these new OSE motors is exactly the same as the CC/Neu's. 3 screws and the rear bearing plate has the same symmetry or screw locations as my Castle motors. I just think someone went cheap with the packaging. But it sure looks like Keda packaging on the surface. But what is curious is the Leopards I have in 40mm all have 4 screw motor face plates. Just like the Dacons. Thats news worthy if you read between the lines.

John

[Brushless55]

The front motor plate on these new OSE motors is exactly the same as the CC/Neu's. 3 screws and the rear bearing plate has the same symmetry or screw locations as my Castle motors. I just think someone went cheap with the packaging. But it sure looks like Keda packaging on the surface. But what is curious is the Leopards I have in 40mm all have 4 screw motor face plates. Just like the Dacons. Thats news worthy if you read between the lines.

John

oh :spy:

[RCKong]

WOW !!! 4 pole 2364kv - 114A - 25V and a whopping 2900watts !!!:thumbup1:

[Brushless55]

the kv is like a 7XL motor
wold be a great Truck motor on 4s

[RCKong]

Or a BAD A$$ P-MONO motor !!!

[RCKong]

If what I'm seein is right, looks like a D wind - better put at least a 180A Speedy on it.

[ray schrauwen]

The front motor plate on these new OSE motors is exactly the same as the CC/Neu's. 3 screws and the rear bearing plate has the same symmetry or screw locations as my Castle motors. I just think someone went cheap with the packaging. But it sure looks like Keda packaging on the surface. But what is curious is the Leopards I have in 40mm all have 4 screw motor face plates. Just like the Dacons. Thats news worthy if you read between the lines.

John

YOu mean Tacons?

[ray schrauwen]

WOW !!! 4 pole 2364kv - 114A - 25V and a whopping 2900watts !!!:thumbup1:

Where did you get these numbers?

[egneg]

I am fairly certain that it's a 6 pole motor.

Edit: I have since found out these are in fact 4 pole motors. I counted the number of times it cogged in 360* and the number was 12 times so I assumed it was a six pole. But when I counted the number of times a UL-1 motor cogged it was 18. So it seems it cogs 3 times per pole.

[LaMoparPower]

Very interested to see how these work out..... Starting to build my twin next week...

[m4a1usr]

YOu mean Tacons?

Yep. You are correct sir!

John

[osprey21]

I stopped by the PO this morning and picked up my motor - looks good.

[egneg]

Or a BAD A$$ P-MONO motor !!!

Hmmmm ... you have me thinking now!

[G1ST]

Are Leopard and Tacon motors the same?

[ray schrauwen]

It seems so. I have a pair of 2860 Tacon's and one 2845 Leopard, look & feel the same.

[G1ST]

That's what I thought. Thanks
I've seen ads that look identical (specs, dimensions, & weight) except for the color of the motor. Price can vary wildly also

[egneg]

Steven any idea what timing should be used?

[RCKong]

I ran this motor 2 laps today and one of the motor wires came undone - there was very little solder on it.
I'm re- soldering all the motor leads. Oh did I mention it was fast...

[Brushless55]

I ran this motor 2 laps today and one of the motor wires came undone - there was very little solder on it.
I'm re- soldering all the motor leads. Oh did I mention it was fast...

What are you running yours in?

[m4a1usr]

I ran this motor 2 laps today and one of the motor wires came undone - there was very little solder on it.
I'm re- soldering all the motor leads. Oh did I mention it was fast...

Do you mean that the wire coming out of the can or one of the bullets? Either cant be good. Thanks for the heads up!

John

[ray schrauwen]

John, the factory solder joints are sometimes alot to be desired. I redo them all.

[RCKong]

I was testing it in my DF33 on 4s2P. It came apart at the bullet connector. The wire itself had little or no solder on it at all. Probably just a fluke, but I'm gonna make sure it dont happen again.

[osprey21]

Thanks RCK - I'll now be removing the shrink and checking the joints on mine.

[RCKong]

BEWARE !!! I don't know how your motor is but mine is
- JUNK - I ran it yesterday, and it came apart at the bullet ( no solder ) in a min - never got above 90* in my DF33 with a X645. It took out a brand new T-180 ESC when it unconnected. When I fixed it ( re-soldered ) it cogged terribly, the wires got very hot, it would not run and had to unhook it quickly before it ruined another T-180 ESC :cursing::cursing::cursing:
I'm sending the motor and controller back to OSE.
RCK

[Brushless55]

BEWARE !!! I don't know how your motor is but mine is
- JUNK - I ran it yesterday, and it came apart at the bullet ( no solder ) in a min - never got above 90* in my DF33 with a X645. It took out a brand new T-180 ESC when it unconnected. When I fixed it ( re-soldered ) it cogged terribly, the wires got very hot, it would not run and had to unhook it quickly before it ruined another T-180 ESC :cursing::cursing::cursing:
I'm sending the motor and controller back to OSE.
RCK

That sounds like a 8XL keda motor I had in my Mean Machine.. It took out a 200A esc and the motor went to the dark side :confused2:

[Steven Vaccaro]

BEWARE !!! I don't know how your motor is but mine is
- JUNK - I ran it yesterday, and it came apart at the bullet ( no solder ) in a min - never got above 90* in my DF33 with a X645. It took out a brand new T-180 ESC when it unconnected. When I fixed it ( re-soldered ) it cogged terribly, the wires got very hot, it would not run and had to unhook it quickly before it ruined another T-180 ESC :cursing::cursing::cursing:
I'm sending the motor and controller back to OSE.
RCK

What packs were you running?

[RCKong]

I was running 2 4s 40c 5000mah Turnigys... plenty of juice -
I'm pretty sure these motors are KEDA's
http://www.kedamodel.com/product/skf4074.html

[Steven Vaccaro]

I was running 2 4s 40c 5000mah Turnigys... plenty of juice -


May I ask why you start your testing with a x645 with a 2350kv motor in a mono?

[ray schrauwen]

I was going to ask that....?

Keda or Leopard, all good motors.

[RCKong]

Thats a prop or 2 down from what I run with my leopard 2200. It did not make it 3 times around the pond and failed. It took about 2 min to get the boat in via fishing pole, and it temped at 85* so I figured it was under 100* when it popped. Set up is not the issue. The reason it failed is because there was only a small spec of solder on the entire connection !!! Out of the 3 wires only 1 had any solder in it.

[Insaniac]

Are you guys running with the stock (4mm) bullets? Don't you switch to at least 5.5mm?

[tiqueman]

They came w/ 5.5s

[osprey21]

After hearing RCK's whoa's, I pulled the shrink back on all three wires of my motor to inspect the joints and there is VERY little solder in the connections - an extremely shoddy job of soldering IMHO. I'm not going to run the motor with the connectors like they are, and I don't feel it's my job to make it right.

[ray schrauwen]

John, the factory solder joints are sometimes alot to be desired. I redo them all.

Bump :closedeyes:

[m4a1usr]

After hearing RCK's whoa's, I pulled the shrink back on all three wires of my motor to inspect the joints and there is VERY little solder in the connections

Mine were like that too but its not a big deal to me. I go over each lead and resolder each motor I have that comes in. Heck for most I have to adapt to my bullet preference anyways. On some its 5.5, others its 6mm and on the bigger motors its 8mm bullets. But I have that ounce of prevention mentality when it comes to all my components.

Looking forward to running this motor sometime in the next month when I get back from the road. It certainly feels like a torquey little bugger on 4S. :w00t:

John

[Rumdog]

BEWARE !!! I don't know how your motor is but mine is
- JUNK - I ran it yesterday, and it came apart at the bullet ( no solder ) in a min - never got above 90* in my DF33 with a X645. It took out a brand new T-180 ESC when it unconnected. When I fixed it ( re-soldered ) it cogged terribly, the wires got very hot, it would not run and had to unhook it quickly before it ruined another T-180 ESC :cursing::cursing::cursing:
I'm sending the motor and controller back to OSE.
RCK

So, alsmost 2400kv. On 4s with a x645, in a DF33?!?!?!? That is a recipe for disaster. LOTS of amps there, man.:sinking-guy:

[Insaniac]

Are these Leopard clones?

[Rumdog]

a clone of a clone of a clone. Chances are, they all come from the same place. Some with different components.

[ray schrauwen]

Yes, I have bought and sold one of those. Only sold it because I wanted the 4082 2200kv from Steve.

[Brushless55]

a clone of a clone of a clone. Chances are, they all come from the same place. Some with different components.

:iagree:
and some even say CASTLE :spy:

[Steven Vaccaro]

This motor is a 4 pole motor. One of the copies like all the rest out there. ALL of the memtioned motors are probably copied from the only licensed Neu design in the world. The Castle Creations motor.


:iagree:
and some even say CASTLE :spy:

And in the end, if you want the best of the best and the Original, buy a Neu Motor!

[Brushless55]

so is this motor no good?

[Steven Vaccaro]

The motors fine. But you have to realize its not a Neu. None of them are. There is a reason no one can keep Neu motors instock. They perform at maximum levels and take abuse.

[Brushless55]

I don't think anyone is comparing them to a NUE, that would be, uh not so smart :confused2:

[tiqueman]

I have not run mine yet, but to chime in my $.02... I will agree that the soldering was less than I expected. Basically, the wires were tinned and then heated to the bullet w/ no other solder added. I re-soldered and will run it but not w/ a 45mm prop. I feel that may be a bit large for the KV. Im going to start w/ a 640 and go from there.....

[tiqueman]

Still have not run mine, but since Osprey hasnt chimed in yet after todays event, I will. Both he and I got Pursuit monos this past week. We raced today (club races) and although not getting eagle tree data and gps data, we did get temp comparisons.

My set up, Ettis 150 opto, stock Pursuit prop which is about a 42mm and a Leopard 4082 2200KV.

Ospreys set up, same boat, same prop T-180 and the OSE 2364 4074. By the looks of it, he ran a bit faster (within a mph) than me. Motors were about the same temp... actually his was a tad cooler than mine I believe. And MY boat was running looser than his. He ran the heck out of it for 3 runs... maybe we did 4, I cant remember. But he had no issues what so ever and the boat(s) hauled the mail! Im installing mine this week.

(Both of us re-soldered the bullets)

[egneg]

Hi Scott, do you know what timing was used?

[tiqueman]

I do not. Hopefully Osprey will chime in soon, if not, shoot him a PM.

Nice prop avatar!

[dasboata]

Do you have any more left steve I will take 1 thanks chris

[Brushless55]

Do you have any more left steve I will take 1 thanks chris

he may have these for sale on his site sometime soon :thumbup1:
I was wanting one to run hard in my ERevo on 4s

[osprey21]

Hi Scott, do you know what timing was used?
Timing was set at 15 degrees.

[egneg]

Timing was set at 15 degrees.

Thanks, I think I may run this in a P-mono.

[ray schrauwen]

ping

[Steven Vaccaro]

I'll have a bunch more and different winds the beginning of April.