PDA

View Full Version : Looks like we will have a big boat motor soon.



Steven Vaccaro
04-02-2007, 06:55 PM
I just tested my Pulso motor. Its 6 OUNCES heavier than a feigao XL motor!
Should push a 35-40" boat with no problem. I dont have the time to water test it. The shaft is 6mm so I had to drill a airplane prop hub to test it out a bit. Went well.

saleens7
04-02-2007, 06:56 PM
whats the KV of it?

will you have a mount and water cooling jacket for it?

Steven Vaccaro
04-02-2007, 07:02 PM
We can order any kv, I purchase a 1100kv test sample.

saleens7
04-02-2007, 07:05 PM
i remember you saying that the quantam i had wasnt a good motor, i may switch it out for this one, but what prices will i expect?

and will it fit on the existing vee stlye motor mount meant for 540 Bl motors and 700's...the one i have?

saleens7
04-02-2007, 07:19 PM
oh, and will there be flex couplers meant for this size motor shaft? (preferably 6mm to 3/16")

SJFE
04-02-2007, 07:29 PM
2 Words..YEE HAA....:D

Steven Vaccaro
04-02-2007, 07:48 PM
Now that I tested the motor a bit I will start working on couplers. The mounting holes are a hair further apart than a 700 motor. It uses 4mm screws. The existing mounts can be drilled a bit to fit these motors.

lferguson
04-04-2007, 04:33 PM
Steven can we order these yet. I know JD said he like his he got from that scammer on eBay. but it wasn't as big as he thought. Look plenty big to me. Do you have a motor chart on these yet?

admin
04-04-2007, 04:38 PM
He got the short version. I have some on order. I should have them in 3 weeks.

Stealth Assassin
04-04-2007, 05:59 PM
I just tested my Pulso motor. Its 6 OUNCES heavier than a feigao XL motor!
Should push a 35-40" boat with no problem. I dont have the time to water test it. The shaft is 6mm so I had to drill a airplane prop hub to test it out a bit. Went well.


Damn... I thought you where going to say you where carrying lehner!:rolleyes:

admin
04-04-2007, 06:07 PM
Lehner? Na. I hope to have some"New" motors soon. :D

Stealth Assassin
04-04-2007, 07:01 PM
Lehner! Lehner! Lehner!;)

lferguson
04-04-2007, 07:03 PM
Steven, I just bought my first Neu today. Would have rather bought from you. Also are you going to carry the Pulso or the Feagio ESC's?

Mich. Maniac
04-04-2007, 07:20 PM
I am running twin bl on 36 light boat I wanna be above 60mph and I was told 2 neu 1512 1.5d motors would do it with x447's and 14.8 lipos can anyone tell me if that is a good setup?

Diegoboy
04-04-2007, 08:50 PM
Sounds good & expen$ive too!

WOW $280 each for the motors! That's more that the cost of my whole fleet!!!

Mich. Maniac
04-04-2007, 08:55 PM
Do you think the nemesis or feigo motors would get me the speed im looking for? I was told I could use the 14xl's but I dont think they would turn the rpm's im looking for

lferguson
04-04-2007, 08:56 PM
IMHO, if you are not racing, seriously racing.. a XL or one of these New Pulso's might serve you just as well.

Diegoboy
04-04-2007, 08:58 PM
I agree. Are you wanting to hit 60 for race or just because?

Mich. Maniac
04-04-2007, 09:00 PM
I think it would be for cause factor for now, but it would be cool, I live on lake so those nice calm weekdays id like to rip across at 60!

lferguson
04-04-2007, 09:01 PM
Talk to Steven, he will know for sure

Mich. Maniac
04-04-2007, 09:03 PM
I think I will but hes probly wantin a break for a few days, Ill order from him next week, thanks gents!!!