Custom Windshields

[monojeff]

Here is a sample of a custom vinyl windshield I am working on.
It can be made for any hull and any color combination.

Price is $15 each or $10 each for 2 or more.
Prices include shipping.

I will discount the price of the windshields if combined with other decal orders.

List of hulls I have templates for:
Insane G2 & G3 Cat
Insane G4 Mobster
R42
Backlash
Whip GV
Wood Whip
Whip 20
Speed Freak G2
Stryker Drag & Regular Cowl
Drag Cat
XXX mono
Delta Force Pirate Mono
HPR Cat
Genesis / Daytona Cat
Fighter Cat River Cat
Lynx 3.5 Tunnel
Top Speed Tunnel
Illusion Tunnel
Phil Thomas
Cobra
Leyde Racing 3.5/7.5
Vision 20
Vs1
Dumas
Insane FE30
Insane FE34

If you have a hull not listed I can make windshields for any & all hulls with a few measurements and a little tweaking.

I also have turbine, vent & hatch kits for cats or monos that can be made in any color combination.

[LarrysDrifter]

Can these be applied to the base coat then cleared over?

[monojeff]

Can these be applied to the base coat then cleared over?

These will be printed on premium grade digital vinyl and then laminated so there is no reason why not.

[LarrysDrifter]

Sweet.Ill check with you at a later date when I get to that point on my build.Thanks.

[monojeff]

Sweet.Ill check with you at a later date when I get to that point on my build.Thanks.

Sounds good, keep me posted.

[FighterCat57]

:popcorn2:

[egneg]

I would like to get 2 for a Lynx 3.5 Tunnel.

http://s10.photobucket.com/albums/a104/egneg/?action=view&current=Lynx-11A.gif

[monojeff]

I would like to get 2 for a Lynx 3.5 Tunnel.

http://s10.photobucket.com/albums/a104/egneg/?action=view&current=Lynx-11A.gif

Sending you a PM

[egneg]

Sending you a PM

Replied to PM.

[monojeff]

Replied to PM.

You get my PM or email?

[egneg]

You get my PM or email?

I checked and didn't get either.

[monojeff]

I checked and didn't get either.

Sending you a PM

[egneg]

Pm Received

[CHUD]

THANKS JEFF SOOOO HAPPY:bowdown::bowdown::bowdown:

[RIPFENCE]

Here is a sample of a custom windshield I am working on.
It can be made for any hull and any color combination.

jeff,
sent a pm about these as well as a wrap..can you do them without the driver?

[monojeff]

Yes here are some samples of a few without drivers with rivets.

[Chuck E Cheese]

how much are these? right now i could use one for a H&M no step 2 and a miss geico (fiberglass hatch). i would want them with the driver

[monojeff]

how much are these? right now i could use one for a H&M no step 2 and a miss geico (fiberglass hatch). i would want them with the driver


Didn't realize I never put up a price.
They will be $10 each, 2 or more $7.50 each

I will PM you and we discuss things further

[JimClark]

got one for the Vac-U-Pickle turbine cowl?

[monojeff]

got one for the Vac-U-Pickle turbine cowl?

No but I can surely make one up as I am still getting the templates for a lot of hulls.
Easiest way is if you can trace me a template & give me a measurement then email it to me I will rework it & email it back to you to check fitment.

[johnmaclean]

interested in windshields for a couple of supervees, minus the drivers

[monojeff]

interested in windshields for a couple of supervees, minus the drivers

Sending you a PM

[JimClark]

Probably the best way would be for me to fill the inside of the canopy with something that will harden and give the shape as I would want it to be attached to the inside

http://www.vac-u-boat.com/images/Vac-U-Pickle/PickleUnlimitedLeftFrontM.jpg


No but I can surely make one up as I am still getting the templates for a lot of hulls.
Easiest way is if you can trace me a template & give me a measurement then email it to me I will rework it & email it back to you to check fitment.

[monojeff]

Probably the best way would be for me to fill the inside of the canopy with something that will harden and give the shape as I would want it to be attached to the inside


I'll PM you & we can discuss details.

[egneg]

Windshields arrived today and they look great - quality is top shelf!!!

Thanks
Chuck

[monojeff]

Appreciate it!

Please post pics when you get them installed. :thumbup:

[egneg]

Appreciate it!

Please post pics when you get them installed. :thumbup:

Will do!

[monojeff]

How about for an FE-30...or do you need the template?

I have one for the FE-30
PM me our email address & will send a sample for you to test out.

[Eodman]

I have a twin cockpit Intruder S that my son and I are rebuilding, do you have windsheilds w/ drivers for it!

If not, where are you located? Perhaps I can send you the canopy!

[ray schrauwen]

Might hit you up for a couple, one, PT Stealth Sport & one Drifter S.

Let you know when i'm ready. Thanks, very decent price too.

[monojeff]

I have a twin cockpit Intruder S that my son and I are rebuilding, do you have windsheilds w/ drivers for it!

If not, where are you located? Perhaps I can send you the canopy!

I do not have one made up.
I am in Portland, OR.

Shoot me a PM & we can discuss options.
I can sometimes make then without needing the canopy in hand with some pics & measurements.

[monojeff]

Might hit you up for a couple, one, PT Stealth Sport & one Drifter S.

Let you know when i'm ready. Thanks, very decent price too.

Keep me posted when you are ready & we can get them going.

[monojeff]

I wanted to make note that I have raised the prices on these a little as I was loosing money with me previous pricing.
I will honor my original price for anyone that has inquired about the windshields up to this point.

From now on the windshields will be
$12 each or $10 each for 2 or more.
Prices include shipping.

I will discount the price of the windshields if combined with other decal orders.

List of hulls I have templates for:
Insane G2 & G3 Cat
Insane G4 Mobster
R42
Whip GV
Wood Whip
Whip 20
Speed Freak G2
Stryker Cat
Delta Force Pirate Mono
HPR Cat
Genesis / Daytona Cat
Fighter Cat River Cat
Lynx 3.5 Tunnel
Top Speed Tunnel
Illusion Tunnel

If you have a hull not listed I can make windshields for any & all hulls with a few measurements and a little tweaking.

I also have turbine, vent & hatch kits for cats or monos that can be made in any color combination.

[monojeff]

Here is an updated list of the hulls I already have templates made up for:

Pricing:
$12 each or $10 each for 2 or more.
Prices include shipping.

I will discount the price of the windshields if combined with other decal orders.

List of hulls I have templates for:
Insane G2 & G3 Cat
Insane G4 Mobster
Insane FE30
R42
Backlash
Whip GV
Wood Whip
Whip 20
Speed Freak G2
Stryker Drag & Regular Cowl
Drag Cat
XXX mono
Delta Force Pirate Mono
HPR Cat
Genesis / Daytona Cat
Fighter Cat River Cat
Lynx 3.5 Tunnel
Top Speed Tunnel
Illusion Tunnel
Phil Thomas
Cobra
Leyde Racing 3.5/7.5
Vision 20
Vs1
Dumas

[monojeff]

Here is some pictures of some recent windshields I have made.

[monojeff]

Few more with drivers

[H2OCamel]

Jeff how about a 36" hydro & Marine Super cat M-1? Oh and a No Step #2

[ray schrauwen]

Few more with drivers

What is the approx. width of the twin canopy H&M hull, I mean each canopy width that is...?

These are very nice and I woulld like a pair for a chinese cat with twin canopies. Very similar to H&M.

If they are close enough in size to the H&M they will fit mine too.

Beautiful.

[monojeff]

Jeff how about a 36" hydro & Marine Super cat M-1? Oh and a No Step #2

If you can send me templates for these I can make them up.
If you take a piece of paper and outline them that way or you can use tape and then it will conform better then outline it with a marker and take it off and put it on a piece of paper to scan and email or mail it to me then I can rework it digitally and send it back to check fitment on.

[monojeff]

What is the approx. width of the twin canopy H&M hull, I mean each canopy width that is...?

These are very nice and I woulld like a pair for a chinese cat with twin canopies. Very similar to H&M.

If they are close enough in size to the H&M they will fit mine too.

Beautiful.

I can email you the templates to print out and check fit on.
PM me your email address.

[HYDROJERRY]

Hey Jeff can you make one for the Genesis cat,,,same shape and size but colord and have the trim and bolts like on the Monster boat in the post above,,, Im starting to build on my carbon cat and need to get things going!!!!!

[monojeff]

Hey Jeff can you make one for the Genesis cat,,,same shape and size but colord and have the trim and bolts like on the Monster boat in the post above,,, Im starting to build on my carbon cat and need to get things going!!!!!


Yes I can make it any color combo you'd want.
PM Me your email address I'll send you over the template to try out.

[JRS Innovations]

Here is a sample of a custom vinyl windshield I am working on.
It can be made for any hull and any color combination.

$18 each or $12 each for 2 or more.
Prices include shipping.

I will discount the price of the windshields if combined with other decal orders.

List of hulls I have templates for:
Insane G2 & G3 Cat
Insane G4 Mobster
R42
Whip GV
Wood Whip
Whip 20
Speed Freak G2
Stryker Cat
Delta Force Pirate Mono
HPR Cat
Genesis / Daytona Cat
Fighter Cat River Cat
Lynx 3.5 Tunnel
Top Speed Tunnel
Illusion Tunnel

If you have a hull not listed I can make windshields for any & all hulls with a few measurements and a little tweaking.

I also have turbine, vent & hatch kits for cats or monos that can be made in any color combination.

I would like a 3.5 Lynx Windshield and a 7.5 Leecraft Tunnel Windshield.

Let me know what you need for the Leecraft.

Thanks
Joe

[monojeff]

Hello Joe,

PM me your email address and I can send over the lynx template for you to check out.
I might have something that will fit the 7.5 or we can discuss what I need to make one up for you.

Thanks

[JRS Innovations]

My email is
jscarp@comcast.net

Joe

[monojeff]

My email is
jscarp@comcast.net

Joe

Email sent

[monojeff]

Rat Cat
Pinky & The Brain

Custom driver windshields for Stryker Cats

[bardahlracing]

Those look outstanding Jeff !!!

[monojeff]

Those look outstanding Jeff !!!

Thanks,
The custom ones are fun! :banana:

[monojeff]

Here is a picture of one on a Lynx with driver.

[JRS Innovations]

Here is a picture of one on a Lynx with driver.

Nice Job Jeff

I can not wait to get it....Awesome
Whoever owns that hull needs to get one of my Lynx Stands....lol

Thanks
Joe

[monojeff]

Nice Job Jeff

I can not wait to get it....Awesome
Whoever owns that hull needs to get one of my Lynx Stands....lol

Thanks
Joe

Thanks,
That is egneg's boat

[shctexas]

Do you have a windshield for the Miss Geico? No rivets and in a no-driver silver finish. Thank you.

[monojeff]

Do you have a windshield for the Miss Geico? No rivets and in a no-driver silver finish. Thank you.

I do not have one for the miss geico as of yet.
If someone can trace it or me so I can rework it, I could start making some.

[monojeff]

Month of JUNE sale $12 for 1 or $10 each for 2 or more.

[monojeff]

Here are some more pictures of some windshields I have made.
Whip GV.
Wood Whip
fightercat 32" River Cat
Custom Canard with Driver
Backlash Amp Theme

Also note I have reduced prices now $12 each or $10 each for 2 or more.

[monojeff]

Daffy Driving a Drag Cat.

[johnf]

Jeff, do you have any pics of a windshield on an HPR cat you have done?

Thanks,
John

[monojeff]

Jeff, do you have any pics of a windshield on an HPR cat you have done?

Thanks,
John

Here is a picture of the one I made for it.
I can adjust it with different colors if you'd want.
I also made the hatches for it.

[johnf]

Hmm, that looks like the new mystic style HPR. My hatch and windshield cutout is different. Don't suppose you have the other version?

[monojeff]

Nope this is the only 1 I have.
If you can trace something up for me and email it over I can duplicate it digitally.

[johnf]

Thanks Jeff, sending you a pm.

[djmaincheese]

Traxxas Spartan Windshield Decal, Thanks Jeff..

http://i689.photobucket.com/albums/vv259/djmeintjes/IMG_0042-5.jpg

http://i689.photobucket.com/albums/vv259/djmeintjes/red.jpg

[monojeff]

Looks sweet!

[Basstronics]

What about a Pursuit?

The one that was on my hull looks like absolute hell. It has jagged edges, square cut where it should of been round. It doesnt even fill the depression where its supposed to go- its like 1/2" off!

[monojeff]

I could make one up but I would need a tracing of the recessed area so I can make it fit correctly as I do not have a template for this hull as of yet.
PM me is you want and I can have you email it to me.

[FighterCat57]

I could make one up but I would need a tracing of the recessed area so I can make it fit correctly as I do not have a template for this hull as of yet.
PM me is you want and I can have you email it to me.

I'll see if I can get the pattern for you.

[monojeff]

Thanks!!

[FighterCat57]

I'll see if I can get a better photo, but this is what it looks like.
Don't think I can get the vector, the guy who designed it left the company years ago.

[monojeff]

What about a Pursuit?

The one that was on my hull looks like absolute hell. It has jagged edges, square cut where it should of been round. It doesnt even fill the depression where its supposed to go- its like 1/2" off!

If someone can put tape over the windshield for the pursuit like you were going to mask it to paint then trace the area with a marker and remove the tape and put it on a piece of paper I can duplicate it this way. If you email me the tracing.

[Basstronics]

Im wanting one with no rivets. Just black with a silver outline.

If Fightercat doesnt make a pattern I can try. Been busy.

[chummer]

Jeff, I don't see the DF29 on your list yet. Have you done one before?

[G.Rose]

Jeff, I would like to purchase the VS1 windshied. Without the driver and with the silver rivet outline.OR what ever you have made up for this cowl.
Gary

[G.Rose]

PP sent

[monojeff]

Guys I have the template for the Pursuit so if anyone is interested I can now make these any color you would want.

[jj2003]

Hi Jeff. If possible, I would like to get the windshield screen for the Traxxas Spartan in silver with black trim and rivets if you can whip it up!

[monojeff]

Hi Jeff. If possible, I would like to get the windshield screen for the Traxxas Spartan in silver with black trim and rivets if you can whip it up!

Do you want actual silver or grey?

If silver then the price is xtra cause I basically need to do 2 separate windshield pieces since the silver would be a separate piece.

[jj2003]

Do you want actual silver or grey?

If silver then the price is xtra cause I basically need to do 2 separate windshield pieces since the silver would be a separate piece.

Big difference in price?

[monojeff]

I could do it for $15 shipped silver trim with rivets and what color windshield black with a grey fade or would you want a color??

[jj2003]

That would be cool! Both price and layout! I like it!

[jj2003]

So far, I have the hatch decals for the Fightercat Daytona and the windscreen for the Spartan. I know your still busy with other orders so I wont bother you about the ZR48 decals for a while yet. What do I owe you at this point?

[VTOL]

Email sent on Decals.

[monojeff]

Email sent on Decals.

Not sure I got you Email?


So far, I have the hatch decals for the Fightercat Daytona and the windscreen for the Spartan. I know your still busy with other orders so I wont bother you about the ZR48 decals for a while yet. What do I owe you at this point?

sending you a PM we can discuss everything

[Chilli]

Jeff, I think I remember someone asking on Jims. Did you have a windshield for the Aeromarine Vector Mono?

[monojeff]

No but I have one for the rampage which is similar size I'm pretty sure.

[Chilli]

Do you have a pic of one installed on a Ramage? Maybe I can do a template for the Vector.

Thanks!

[monojeff]

Do you have a pic of one installed on a Ramage? Maybe I can do a template for the Vector.

Thanks!

Here you go.
I made the templates with some paper and just cut it out till I got it the way I liked it.
You can either scan them or mail them to me and I can make it from there..

[Chilli]

I'll come up with a template when I get some free time and will contract you when I'm ready to send it to you.

Thanks!!

[VTOL]

Jeff resent to 'jeff@groundupdesignz.com'
Thanks again.

[runzwithsizorz]

Jeff, I am currently rebuilding, and repainting a Titan33. Can you do stars that are pre-cut? I am pretty much going with the same paint scheme as you see in the pic, and
have already painted the blue, but this time down the side, (more stars). I am about to shoot the red which will cover the canopies, (no more silver). perhaps you could
help me with the canopies? Not really sure how to make a template, or just what I would like for windscreens, (suggestions?). Was just gonna block off an area and use the
same blue as I did for the bow, then maybe add a silver pin stripe with rivets. The vinyl I have already purchased to make the stars seems a bit thick, and I think maybe
will be a problem when I seal her. This boat is my own personal baby, and not a basher, She will be a showcase, and who knows, she might also run as well.
In spite of reading this thread, I'm still unsure about making a 6421064211template. Also my scanner is not working now, I do have a fax though.
Let me know your thoughts, suggestions, and pricing. Kindly, Todd

[monojeff]

If you can make a templat that's the easiest but I do have one I made for a cat similar canopy that might come very close to fitting.
I could also have you fax it to me if needed.
Do you have a printer I can send you the template PM me your email agrees and we can chat.
As for the stars I can make them what type of material did you buy?

[jj2003]

Hi Jeff, Sent you a PM regarding payment. JJ

[VTOL]

Jeff,
I have resent you an Email requets for decals.
Any consideration would be much appreciated.
Thanks again.

[greg pereira]

can u make them for the delta force explorer cat and do u ship to canada let me know thank you

[monojeff]

can u make them for the delta force explorer cat and do u ship to canada let me know thank you

I do not have a template for this boat if you can trace me one out I can make one up.
I ship worldwide..

[VTOL]

I like decals.
64766

[GTRhino24]

You ever done one for a Spartan?

[jj2003]

Yes he has! Post # 63 and #35 and this:

7006770068

Excellent work! Thanks again Jeff!

[GTRhino24]

Looks great! I'll take two. PM me your Paypal address and the cost.

[jj2003]

PM him as well. He is usually very busy and this is just a side gig he does. He'll respond to the thread as well but PM him directly also. Well worth the wait IMHO!

[monojeff]

Looks great! I'll take two. PM me your Paypal address and the cost.
PM on the way.


PM him as well. He is usually very busy and this is just a side gig he does. He'll respond to the thread as well but PM him directly also. Well worth the wait IMHO!

Appreciate you jumping on this for me and posting a picture!

[jj2003]

Your welcome Jeff! Glad to help! He'll be more than satisfied!

[GTRhino24]

Hey Jeff, the windshields look great!

http://i1088.photobucket.com/albums/i337/GTRhino24/IMG_3743.jpg

[Serpents811]

monojeff , got pm from sir

[cordecker]

Monojeff, I need windshields that are like what you have on the Spartan for my R41 Stryker cat and my Pursuit Mono. Do you have athose?

[HydroMike]

Jeff did u get that windshield made up for me yet for the 21 whip LMK

[Brushless55]

is there one for a DF33?
thanks

[cacofonix]

hello Jeff

i'm looking for one for Racemaster (or Rapid)

herve

[Troy711]

Hi Jeff, are you able to do a mirror like finish for the Spartan? I'm looking for something to compliment the decals I have on the side of my boat.

http://i13.photobucket.com/albums/a277/troy711/7fdb1c97.jpg

[monojeff]

It might be doable but can not guarantee the windshield would sit flat since chrome vinyl doesn't like to bend very much so not 100% sure it would work or not.

[monojeff]

is there one for a DF33?
thanks

Yes I have one for the DF I believe I posted a picture of it in here somewhere??

[Drax21]

Hey Jeff, I need a windshield for my DF41. Would the DF pirate one you have on the first page work?

Here's a pic. You can see the outline of where the Windshield was. 74610

[Brushless55]

Yes I have one for the DF I believe I posted a picture of it in here somewhere??

I could use one Jeff for my DF33
thanks

[Troy711]

It might be doable but can not guarantee the windshield would sit flat since chrome vinyl doesn't like to bend very much so not 100% sure it would work or not.

I'm more than happy to give it a go, I'd it doesn't work at least I can say I tried. Do you need to do it in 2 separate pieces?

[sampit]

Do you have a nice big one for the Fightercat Cheetah yet?

[monojeff]

I'm more than happy to give it a go, I'd it doesn't work at least I can say I tried. Do you need to do it in 2 separate pieces?

Yes it would be in 2 seperate pieces the chrome would be installed last. PM me and we can work it out.


I could use one Jeff for my DF33
thanks

Ok shoot me a PM or call me and we will work it out.


Hey Jeff, I need a windshield for my DF41. Would the DF pirate one you have on the first page work?

Here's a pic. You can see the outline of where the Windshield was. 74610

If you can trace this for me and scan it then email me the template I can make one from that.
You can use tape then cover the windshield and use a marker to outline the edges then PM me from there once you have that.


Do you have a nice big one for the Fightercat Cheetah yet?
No I do not as of yet I will contact ben and see what he has worked up and we can go from there.

[monojeff]

I'm more than happy to give it a go, I'd it doesn't work at least I can say I tried. Do you need to do it in 2 separate pieces?

Yes it would be in 2 seperate pieces the chrome would be installed last. PM me and we can work it out.


I could use one Jeff for my DF33
thanks

Ok shoot me a PM or call me and we will work it out.


Hey Jeff, I need a windshield for my DF41. Would the DF pirate one you have on the first page work?

Here's a pic. You can see the outline of where the Windshield was. 74610

If you can trace this for me and scan it then email me the template I can make one from that.
You can use tape then cover the windshield and use a marker to outline the edges then PM me from there once you have that.


Do you have a nice big one for the Fightercat Cheetah yet?
No I do not as of yet I will contact ben and see what he has worked up and we can go from there.

[mrproc1]

Are you still making decals?

[HydroMike]

Jeff have u worked up the stuff for me ?

[mrproc1]

I would like a sliver/chrome mirrored wind sheiled decal

[ray schrauwen]

THANKS JEFF SOOOO HAPPY:bowdown::bowdown::bowdown:

Can Jeff size these ones to a Miss Geico?

Very Nice!!

[Basstronics]

Jeff,

Did you ever get one for a pursuit?

[srislash]

Jeff,

Did you ever get one for a pursuit?Ooh,I'd be into that if you have time to punch a couple out Jeff.
Also have the itch to get on this PB Miss Bud hydro lately.Did you ever get something worked up for it? No rush here.

Shawn

[monojeff]

Monojeff, I need windshields that are like what you have on the Spartan for my R41 Stryker cat and my Pursuit Mono. Do you have athose?
Yes I have both of these I can make up for you. PM me and we will go from there.


Jeff did u get that windshield made up for me yet for the 21 whip LMK
Mike I am working on my list and hoping to have your stuff done soon I know I have taken forever!!


is there one for a DF33?
thanks

Yes I have one for the DF33, need to know colors you want.
I made one for ripfence on the complete wrap I did you can see it in my other thread.



Can Jeff size these ones to a Miss Geico?

Very Nice!!

Yes Ray that would be no problem same thing email me and we will go from there.


Jeff,

Did you ever get one for a pursuit?

Yes I have one for the pursuit I have made a few of sent some out last week but have not gotten back photos of them installed yet.
PM me what you want.


Ooh,I'd be into that if you have time to punch a couple out Jeff.
Also have the itch to get on this PB Miss Bud hydro lately.Did you ever get something worked up for it? No rush here.

Shawn

PM me and remind me what we were doing or I can dig through my messages and find the info.

[Brushless55]

Yes I have one for the DF33, need to know colors you want.
I made one for ripfence on the complete wrap I did you can see it in my other thread.



Oh wow, I did not know I had a color choice!
let me take a look and see on your other thread
My DF33 is bright yellow and I love these guys!
http://i703.photobucket.com/albums/ww39/filmmaker2009/pinky_brain.jpg

[POWERS]

Got anything goin for the ProBoat Impulse 31? Maybe something like this one http://forums.offshoreelectrics.com/attachment.php?attachmentid=45476&d=1303616882 ? It would go well with my paint scheme, black and green.

[chevyboy67]

I'm definitely going to get one of these!! Do you make one for the blackjack 26 hatch made by tiqueman?? I know you're probably tired of answering these haha

[monojeff]

I do not have anything for the impulse or the blackjack.
If you can trace the outline of the windshield and scan it I can make them from that.

[chevyboy67]

Alright, ill trace the outline tomorrow, and scan it to you in a PM and well go from there.... Thanks a lot, I appreciate it!!!

[Basstronics]

Jeff,

I sent payment with a note for a Puruit windshield 6/11/12

Just checking to see what the status is. I havent heard or received anything as of yet.

Thanks!

[srislash]

I am also waiting on info on a Ren& Stimpy Pursuit Windshield Jeff.Just a reminder.LOL

[DK535]

Do you have a cyberstorm windshield ?

[CoreyM]

Pm sent. Would like a fightercat cheetah windshield if you can do it?

[monojeff]

I do not have one for the cyber storm
Nor do I have one for the cheetah I'm trying to get Ben to send me 1!

[CoreyM]

Ya. I noticed the ste is closed till further notice. That stinks. Sounds like it could be a while then. If you come up with something please get in touch. I would love to have a windshield on this bad boy. What do you need sent to you? The canopy?

[Steven Vaccaro]

Anything for the Df explorer cat?

[monojeff]

Ok guys I am getting back into the swing of things and should be able to start producing all the decals again without it taking forever like it has been.

I do not have a windshield template for the following boats but could make them if I had a template to work from.
cyberstorm
cheetah
explorer cat

If you can trace the windshield and email it or mail it to me then I could make one for you.

[CoreyM]

Good to hear you will be on hear more often again. I hate delayed response. :-). I'll be tracing my cheetah for a template for you when I receive it.

[Brushless55]

Ok guys I am getting back into the swing of things and should be able to start producing all the decals again without it taking forever like it has been.

I do not have a windshield template for the following boats but could make them if I had a template to work from.
cyberstorm
cheetah
explorer cat

If you can trace the windshield and email it or mail it to me then I could make one for you.

Still looking to get a Pinky and the Brain for my DF33 with light Blue back ground.. :tiphat:

[KartRacer]

Hi monojeff
In the beginning stage of a DF Pirate 35" mono.
Would be interested in a windshield and it looks like you already have the template. Also want to do "Miss Almond Joy" logo on each side and a broken candy bar on the front deck or something as such. Can you do this? approximate cost? Can these be applied without clear coating?
Thanks in advance.

[KartRacer]

This is what I was thinking
8359483593Can't seem to add images so here is the inspiration!:)

[monojeff]

See what we can do be in touch with everyone after the holiday.

[KartRacer]

Thanks!
I am not in a rush!

[Alfa Spirit]

MMP Rapid custom windshield

83613

83620

Scale 1 on the .pdf file

[CoreyM]

Pm sent

[Davinsta]

Hey monojeff great lookin stuff how much for the hatch kit with a windshield kit with rivets or anything that goes with miss geico or blackjack 29, please let me know so I can place an order ASAP .

[CoreyM]

Pm sent.

[larz001]

pm sent awile ago havent had a reply

[monojeff]

Sorry get lots of PMs sometimes they get lost in the mix.
I just responded to your message.

Thanks

[larz001]

Sorry get lots of PMs sometimes they get lost in the mix.
I just responded to your message.

Thanks

thats ok i understand i figured you were really busy,, pm sent with details

[CoreyM]

Received my decals and windshields. Wow! Great work you do monojeff. Can't wait to get another order from you. Thanks for all the help/email responses/and great work you gave me! Merr Xmas.

[johnl6676]

Do you offer windshields for a Spartan and a MM2 by Aeromarine

[monojeff]

I have windshields for the spartan just need to know what color you'd want.
I do not have 1 for the MM would need a template made to go off.
Need me to explain how to do this?

[Brushless55]

I need a Pinky and the Brain for my DF33
back ground blue
thanks

[monojeff]

I need a Pinky and the Brain for my DF33
back ground blue
thanks

Did I not PM you on this?
Send me an email if you still have mine and I will send you what I made up for you!!
Did you ever get that template made up for me??

[johnl6676]

Well for now why don't we just do the spartan what is available?

[Brushless55]

Did I not PM you on this?
Send me an email if you still have mine and I will send you what I made up for you!!
Did you ever get that template made up for me??

never got a pm bro?
no template :confused1:
but looking forward to making my DF33 PMono look sweet :biggrin:

[devo]

Jeff I know we talked recently about a Popeyes wrap for my rivercat 32 which I still wanna do but for right now I need two windshields. 1 for the fighter cat rivercat 32 which I would like done to look like or close to chrome and with no visible driver and a black trimring with bolts, & I would also like two of the hatch lids for the same boat in whatever dark color you think looks good. The second boat is a aquacraft top speed 2 tunneland I would like you to make the call on this one the boat is yellow and I like the trim ring with bolts but other than that it's up to you. Let me know how much and when you could get them out to me and give me your PayPal address so that I can send payment. Thanks in advance.:biggrin:

[devo]

Jeff I know we talked recently about a Popeyes wrap for my rivercat 32 which I still wanna do but for right now I need two windshields. 1 for the fighter cat rivercat 32 which I would like done to look like or close to chrome and with no visible driver and a black trimring with bolts, & I would also like two of the hatch lids for the same boat in whatever dark color you think looks good. The second boat is a aquacraft top speed 2 tunneland I would like you to make the call on this one the boat is yellow and I like the trim ring with bolts but other than that it's up to you. Let me know how much and when you could get them out to me and give me your PayPal address so that I can send payment. Thanks in advance.:biggrin:

Jeff will you make these for me please?

[atchison]

You still making these?

[monojeff]

Having quit a few people ask if I am still making these.
The answer is yet.
Take a look at the first post for list and pricing details.
http://forums.offshoreelectrics.com/showthread.php?20431-Custom-Windshields
Thanks guys for all the support.

[devo]

Im interested in a set of windshields hatches and turbines for my deltaforce pirate 35 and fantasm catamaran all in black if you have time to make them I will paypal the funds to you just give me the total. I would also like some mercury racing stickers made if your interested

[Sean]

Hey , Jeff I need a windshield for a fightercat cheetah and a mean machine v2, let me know the cost, I'll paypal asap.
Thanks Sean

[riptide1]

Jeff, I also need a windshield for a FC Cheetah and perhaps other decals like a top hatch.

[olwarbirds]

Jeff, need windshields with driver Genesis, Delta force Cyberstorm mono and Aquacraft UL-1....let me know what else you may have for these boats...still need to get with you on some custom windshields and wraps...tks bro... DJ

[monojeff]

Hey , Jeff I need a windshield for a fightercat cheetah and a mean machine v2, let me know the cost, I'll paypal asap.
Thanks Sean

I have the Cheetah but not mean machine v2.
I have mean machine v1 template no one has traced the vs for me yet.

Price for 1 is $15 shipped, what is your email and I will send paypal request.

[monojeff]

Jeff, I also need a windshield for a FC Cheetah and perhaps other decals like a top hatch.

I will do the hatches and windshield for $20 shipped let me know what colors you want the hatches to be in and what color windshield.
Also need email for paypal request.



Jeff, need windshields with driver Genesis, Delta force Cyberstorm mono and Aquacraft UL-1....let me know what else you may have for these boats...still need to get with you on some custom windshields and wraps...tks bro... DJ

Is the Genesis an official genesis?
I believe I have the template for the cyberstorm but need to verify the size.
I do not have a UL-1 template.

Shoot me a pm and what all you need with email info and we can take it from there.

[olwarbirds]

Jeff, yes official Genesis....will pm .....DJ

[richard]

hi jeff can you let me know when I will have the decal out.i pay for it dec 4.i emailing you and you not getting back to me I not happy .you say you will have it out on Monday.

[kfxguy]

hi jeff can you let me know when I will have the decal out.i pay for it dec 4.i emailing you and you not getting back to me I not happy .you say you will have it out on Monday.


I just text Jeff and let him know. He's been extremely busy here lately. He will get you taken care of. I deal with him all the time. Sometimes it takes a little while (life gets in the way a lot ) but rest assured you'll be pleased with whatever he's doing for you.

[monojeff]

hi jeff can you let me know when I will have the decal out.i pay for it dec 4.i emailing you and you not getting back to me I not happy .you say you will have it out on Monday.

Just sent you an email this is why I am not taking many orders lately as I can not keep up with them.
Long hours at work and raising a 2 year old has me overloaded as it is.

[Soonerfloyd1965@gmail.com]

Are you still making these

Sent from my LG-H910 using Tapatalk

[6S HYDRO]

need one for a whip 20 and one for a df33, grey color shield w/ black border, w/ rivets, no driver

[monojeff]

Revive an old thread.
It’s been a long time coming but I finally have a website up and running.
Online store is active and ready to take orders.
Check out.
http://www.rcboatdecals.com
I’ve got some of the stuff I offer up and will be adding a lot more so stay tuned!

You can also follow on Instagram and Facebook @rcboatdecals

[Dartt@icloud.com]

Do you have templates for a CF Raider m34? windshield, the two depressed areas at the bow and other graphics?
Thank You
Scott

[monojeff]

Do you have templates for a CF Raider m34? windshield, the two depressed areas at the bow and other graphics?
Thank You
Scott

OSE sells the windshields.
https://www.offshoreelectrics.com/proddetail.php?prod=jr-M34-decal-drk

I can make you a custom one if you’d want.
I can make any graphic you?d want for it. Shoot me a PM we can chat.

[pearlnotchback]

Hey I?m Andy and I?m new here and was wondering if you can make a windshield for a Delta Force Vortex 22?

[monojeff]

Hey I?m Andy and I?m new here and was wondering if you can make a windshield for a Delta Force Vortex 22?

I believe I do have this template if you are still interested shoot me a PM.
Sorry i did not respond sooner just saw the message.

[pearlnotchback]

Yes I?m still interested. I can?t figure out how to PM though lol.
Andy

[don ferrette]

Anyone know what happened to Jeff?? He did some really nice stuff...............

[tjsb]

Do u have miss Budweiser unlimited decals for a DF 24 inch unlimited?

[tjsb]

Do u have miss Budweiser unlimited decals for a DF 24 inch unlimited?

[tjsb]

Delta Force 28 Pathfinder Catamaran (https://www.offshoreelectrics.com/proddetail.php?prod=df-Cat-29)?

[Xrayted]

Delta Force 28 Pathfinder Catamaran (https://www.offshoreelectrics.com/proddetail.php?prod=df-Cat-29)? How about the Delta Force 29" version which is in stock? Its a mono, but has a very similar "bubble" cockpit as the one you are asking for. I use windshield decals from one boat to another all the time since many of them seem to be permanently out of stock, and it works well as long the cockpit shape is similar and for a similar sized boat.

The one currently on my 36" TFL is from a completely different model (Delta Force Pirate), and looks way better IMO than the one made for it which I think is too small and skinny. So far I haven't ever had one that was so far off I couldn't use it, but its a $10 part if so and no big deal to me if it weren't to work out, and I could just save it for another boat in the future

https://www.offshoreelectrics.com/proddetail.php?prod=jr-df29-decal-drk

[tjsb]

Thanks

[Bird_dog92]

Would it be possible to have a open hatch made for a Traxxas Spartan? I'd like something similar to the M41 catamaran hatch with the seats and steering wheel.

[monojeff]

I make stickers not actual hatches or windows.

[monojeff]

Do u have miss Budweiser unlimited decals for a DF 24 inch unlimited?

I can make some up would need sizes send me a pm if you want.

[Ryanj]

I'm coming around and seeing this cool you do this. What I'm build is a old Aqua craft Sv27 for my daughter for Racing for next year. soon i'll be needing a windshield sticker for the boat. Also she wants a hello kitty look for this boat too. I'm on the hunt for graphics to building what she wants. I've reworked this hull alot and wanting to paint when the weather is warmer soon. Do you have somthing in the nature for a old sv27. Thank you

[monojeff]

I'm coming around and seeing this cool you do this. What I'm build is a old Aqua craft Sv27 for my daughter for Racing for next year. soon i'll be needing a windshield sticker for the boat. Also she wants a hello kitty look for this boat too. I'm on the hunt for graphics to building what she wants. I've reworked this hull alot and wanting to paint when the weather is warmer soon. Do you have somthing in the nature for a old sv27. Thank you

If you could make a template then we could make something up I’ve not done one of these that I can remember.

[Froggy]

Need one for a Delta force 26

[Ryanj]

I can make some up would need sizes send me a pm if you want.

I'll see if i can pull some type of templet here soon. Then i can photo copy it to get a scale off it to be able to send

[Froggy]

Pm if you can do one for a Delta Force 26 mono OSE is out of stock

[monojeff]

Pm if you can do one for a Delta Force 26 mono OSE is out of stock

They will be back in stock soon!

[Mad2214]

I looked through the thread and did not see a listing for the DF Vortex 34, do you have that one?

[monojeff]

I looked through the thread and did not see a listing for the DF Vortex 34, do you have that one?

No sorry youd have to make a tracing of it.

[photohoward1]

What about an m40 Raider?


Sent from my iPhone using Tapatalk

[monojeff]

What about an m40 Raider?


Sent from my iPhone using Tapatalk

I just confirmed the 40 is different than the 34 I’m working on getting a template going for it.
Will update you soon as I do. Message me what you want it to look like.