PDA

View Full Version : Leopard 5692 on 10S, how......



Gerwin Brommer
10-30-2010, 09:22 AM
do they handle it ?

Anyone already tried this combo ??

thinking about a 730Kv 5692 on 10S in a 40"mono

avery
10-30-2010, 05:12 PM
Sry haven't tried but was considering two for my cto4. Sport running ialso looked no info on voltage so I did math with 12s 32000 thereabouts . Will keep an eye on post as am interested

Fluid
10-30-2010, 11:45 PM
All you have to do is look hard enough:

http://www.leopardhobby.com/product/product_veiws.asp?id=1256&functionID=01020202

The LBP5692/3Y motor is good for 13S, 110 amps and 5500 watts, according to Leopard. Usable 10S rpm on the water is probably around 25,000 to 26,000.


.

Gerwin Brommer
10-31-2010, 03:29 AM
Yep, I know.
But that is what the manufactorer says.
I'm curious about what the users say :-)

mm123521
10-31-2010, 09:13 AM
Gerwin:
I am gonna try a 5692 in a 41 inch homebuilt cat.
The hull is 90 % complete, and may be in the water next weekend.

http://forums.offshoreelectrics.com/showthread.php?t=18888&highlight=5692

I bench tested the motor on 12S and the tachometer read 34000 rpm, no load.
The motor was pulling 2 or 3 amps, no load, full speed.

My first FE build.