UL1 Boat Stand

[JRS Innovations]

Hello All

This is my new UL1 Boat Stand.
The Stand fits the hull perfectly and does
not allow it to slide off and protects
the rear of the boats hardware from damage.

The Stand will sell for $35.00
plus S&H
You can have your name or logo engraved
for $ 3.00 per side.

Joe

[Steven Vaccaro]

Nice!

I would like to say that I met Joe at the 2010 nats. He's a nice guy with some really cool products. Checkout his prop boxes. Well worth every cent.

[JimClark]

What is the stand made out of?

[JRS Innovations]

What is the stand made out of?

Hello Jim

It is made out of a lightweight very strong composite plastic.
It is black through & through and will clean up like new with Armorall.

Thanks
Joe

[Steven Vaccaro]

Joe I just sent the money for the propbox. Funny thing, that paypal request you sent, wouldn't work. So I sent it direct to you.

[Chilli]

Joe, Don't you make a stand for the JAE FE also???

[HOTWATER]

Yep! That is the stand that I am using Mike...Very nice stuff!!

[JRS Innovations]

Yep! That is the stand that I am using Mike...Very nice stuff!!

Kent

That is one beautiful JAE Rigger.
Nice workmanship......

Joe

[JRS Innovations]

Joe, Don't you make a stand for the JAE FE also???

Hello Mike

I make most of the JAE stands....
Still need to design a few.

I have one for the 21 JAE but I am not sure if the FE is
the Identical hull.....Though I have one being built for me by David Prusse
and once I get it back I will see....

Thanks
Joe

[Chilli]

Very Good Joe. The JAE FE tub is a little different than the nitro version. I've seen your work. Very nice stuff. Welcome to the FE side!

[BakedMopar]

I would definately be interested in a JAE .21FE stand.

[bigpapa]

joe, is there a link or site that i can see all your products ??????? tks

[chummer]

I would like to know more about the prop boxes that Steve has mentioned.

[bigpapa]

me 2 chummer 4 sure

[HOTWATER]

Yo BP....these are some of the finest stands available and i'm sure the prop boxes he makes will be second to none!! Very good fit and finish work (I can't imagine it getting any better...)...fits like a glove with my JAE FE!!!!

You guys would be very impressed with his work!!!

-Kent

[JRS Innovations]

Yo BP....these are some of the finest stands available and i'm sure the prop boxes he makes will be second to none!! Very good fit and finish work (I can't imagine it getting any better...)...fits like a glove with my JAE FE!!!!

You guys would be very impressed with his work!!!

-Kent

Thanks Kent

"Don't Tase me Bro"......That is Hilarious....LOL

[JRS Innovations]

joe, is there a link or site that i can see all your products ??????? tks

I have a Web Site but it has not been updated in about a year....
The Issue is that I get so much attention from the Forums I am on
it almost seams like a waste of time....Though I will get it updated
soon.

I will Post some more of my Products now that I am becoming addicted
to FE.....I love it....

Thanks
Joe

[geodehunter]

Joe, Don't you make a stand for the JAE FE also???

I to would be interested in buying one for my JAE FE.

[JRS Innovations]

I to would be interested in buying one for my JAE FE.

Hello Robert

I make a lot of the JEA stands but not the FE Version yet.
I have one coming soon for my personal use and I will design a
FE Version then.....
I will post it as soon as it is done.

Thanks
Joe

[geodehunter]

Thanks Joe!!! Consider one sold when you start to produce them. Thanks, Robbie

[Brushless55]

I've seen his stands upclose and they rock! :rockon2:
I want one Joe :hug1:

[JRS Innovations]

I've seen his stands upclose and they rock! :rockon2:
I want one Joe :hug1:

Email me at:
jscarp@comcast.net
I will need your shipping address.
I Use PayPal only.
Did you want anything engraved on it....$3.00 per side

Thanks
Joe

[HOTWATER]

Hello Robert

I make a lot of the JEA stands but not the FE Version yet.
I have one coming soon for my personal use and I will design a
FE Version then.....
I will post it as soon as it is done.

Thanks
Joe

Hey Joe!

The white JAE in my post is an FE.....whatever you're doing right now with those JAE stands is perfect for FE's as well!!! Very nice (not too snug) fit! I would not change a thing on them....also plenty of room with the one peice Zipp (or Jim Mamaril's) strut

Rock on bro!

-Kent

[JRS Innovations]

Hey Joe!

The white JAE in my post is an FE.....whatever you're doing right now with those JAE stands is perfect for FE's as well!!! Very nice (not too snug) fit! I would not change a thing on them....also plenty of room with the one peice Zipp (or Jim Mamaril's) strut

Rock on bro!

-Kent

Thanks Kent

The one thing I would like to know from JAE users is that if there are many
Rudder length options....
Though I have not had anyone tell me that the stands were to short and the rudder would hit the table it seams there are some different lengths out there for sure.

The critical length is from the bottom of the transom (not ski) to the lower tip of the rudder.

Zach Davis had me build one that was slung way down low to the table top and it fit his application real well....So does anyone know of the range for rudder lengths for the 21/FE size JAE.....

Thanks
Joe

[Brushless55]

I get mine this weekend! :banana:

[Brushless55]

BAM!
thanks Joe
http://i703.photobucket.com/albums/ww39/filmmaker2009/007-6.jpg
http://i703.photobucket.com/albums/ww39/filmmaker2009/010-3.jpg
http://i703.photobucket.com/albums/ww39/filmmaker2009/009-10.jpg
http://i703.photobucket.com/albums/ww39/filmmaker2009/012-4.jpg

[Jeepers]

thats sweet! now come and race that thing at the Northern Colorado Nitro Burners 8th annual Turkey Run on November 7th at Sanborn Park. sign up here!
http://www.namba20.com/index.html

[Brushless55]

thats sweet! now come and race that thing at the Northern Colorado Nitro Burners 8th annual Turkey Run on November 7th at Sanborn Park. sign up here!
http://www.namba20.com/index.html

:hide:

[russ722]

BAM!
thanks Joe
http://i703.photobucket.com/albums/ww39/filmmaker2009/007-6.jpg
http://i703.photobucket.com/albums/ww39/filmmaker2009/010-3.jpg
http://i703.photobucket.com/albums/ww39/filmmaker2009/009-10.jpg
http://i703.photobucket.com/albums/ww39/filmmaker2009/012-4.jpg

that is 100% :rockon2:bassazz

[Brushless55]

Yes, Joe does some sweet work for sure!

[russ722]

i was talking about the stand! :sarcasm1: no seriously nice stand and boat i may get one soon .

[JRS Innovations]

I would like to know more about the prop boxes that Steve has mentioned.

Here is the link to the PropBox I have posted here.

http://forums.offshoreelectrics.com/showthread.php?t=18951

[jfrank71]

Are these still available? If so, I need one. Maybe two.

Thanks, frank

[teddyboy]

Do you have one available and what is the total price to 39180?

[electric]

Bumping this thread. Joe I am interested in a JAE FE stand. Are you still making them and how much are they?

[JRS Innovations]

Bumping this thread. Joe I am interested in a JAE FE stand. Are you still making them and how much are they?

Hello

I am still making them and sell them for $55.00 plus S&H
I am shutting down from June 21 through July 15 so Please let me know soon
if you want one and I will get it out before I leave.

Figure $14.00 for shipping.

If you want one email me your PayPal email address to:
jscarp@comcast.net
and I will send you a request and get it done this weekend.

Thanks
Joe

[teddyboy]

Paypal payment sent. Will you be able to get it out before vacation?

[electric]

Hello

I am still making them and sell them for $55.00 plus S&H
I am shutting down from June 21 through July 15 so Please let me know soon
if you want one and I will get it out before I leave.

Figure $14.00 for shipping.

If you want one email me your PayPal email address to:
jscarp@comcast.net
and I will send you a request and get it done this weekend.

Thanks
Joe

Great. Sent you my paypal addess..

[JRS Innovations]

Paypal payment sent. Will you be able to get it out before vacation?

I will send it before I leave on this Tuesday....

Thanks
Joe

[electric]

Great. Sent you my paypal addess..

Money has been sent... I cancelled the one you sent me because I had already paid you before I got the request. Sorry about that, just have not seen it done that way before.

[teddyboy]

Joe, you are the MAN. Still have my eye out on the Backlash stand, but still saving my coins!

Thanks, Ted

[gizmo1]

Joe,

thanks for the reply.

i will post up pics of the stand with the FE30 on it as soon as i get it..

money sent

Buddy

[jlb7569]

Hello, I would like to purchase one of your composite boat stands for an Aquacraft UL1 Superior hydro. Can you please give me your paypal address and the total with shipping. Thanks, Jamie.

Sent from my DROID RAZR using Tapatalk 2

[JRS Innovations]

Hello Jamie

The cost is:
$35.00
$12.00 S&H
$47.00 assuming lower 48

Send to:
jscarp@comcast.net

[jlb7569]

Hello, O.K. thanks, I'll be sending you a paypal for one of them sometime soon. Jamie.

Sent from my DROID RAZR using Tapatalk 2