PDA

View Full Version : Miss Geico on Neu 6s ???



Mick..BJ26..BL
10-05-2010, 06:32 AM
I'm thinking of putting a Neu 1415 1500kv on 6s.
Wondering what you guys think???

blackcat26
10-05-2010, 09:54 AM
Go for it! That will be a good combo but another esc would need to be used.

blackcat26
10-06-2010, 08:29 PM
One thing I need to mention is that the stock motor on 6s got me low to mid 50's with a 642. That's plenty fast enough to get you in trouble if you are not paying attention.

Mick..BJ26..BL
10-06-2010, 08:59 PM
Really!! yeah thats fast enough, I didnt think that the stock motor would handle 6s... I have also been thinkin of a 1512 1.5Y 1850kv thats on here,, on 5s.. Probly still need a ESC though.

Have to wait till the Gecio is back in stock..

onegreenray
10-06-2010, 09:46 PM
i just bought that motor and am going to hook up a turnigy 180 esc. going to see if i can get it wired up this weekend and on the water. i am hoping steve gets some water jackets for these though.

Diesel6401
10-06-2010, 10:04 PM
Really!! yeah thats fast enough, I didnt think that the stock motor would handle 6s... I have also been thinkin of a 1512 1.5Y 1850kv thats on here,, on 5s.. Probly still need a ESC though.

Have to wait till the Gecio is back in stock..

For $60 a CC/Neu 1512 1.5Y would be hard to pass. http://www.castlecreations.com/promos/motor_clearance/motor_clearance.html, the stock motor can take the power not the esc though.

blackcat26
10-06-2010, 10:26 PM
Really!! yeah thats fast enough, I didnt think that the stock motor would handle 6s... I have also been thinkin of a 1512 1.5Y 1850kv thats on here,, on 5s.. Probly still need a ESC though.

Have to wait till the Gecio is back in stock..

Motor is a beast on 6s. No problem there at all. Now the factory esc should not be used on 6s unless you like to gamble.

Diesel, that's why I bought one! I'm a speed whore tho. No such thing as too fast.:banana:

Mick..BJ26..BL
10-06-2010, 11:55 PM
Just grabbed 2 1512s and a 1717 just in case :bounce:
Now.. for a ESC.. Oh and the boat :doh:

battlefury
10-07-2010, 01:22 AM
i just bought that motor and am going to hook up a turnigy 180 esc. going to see if i can get it wired up this weekend and on the water. i am hoping steve gets some water jackets for these though.

dude do keep us posted with pictures. i ordered 180 turnigy too, hope this baby sits nicely in the MG hull

blackcat26
10-07-2010, 05:39 AM
It will sit nicely, it's just a matter of where....

onegreenray
10-07-2010, 05:35 PM
will do, I'll take pic once i get it set up.