PDA

View Full Version : leopard 4082 1250KV


TJ904
10-04-2010, 10:43 AM
I received my leopard 4082 in 1250KV (LBP4082/2.5Y) last week. I got the new motor in and running on Friday. I ran about 4 charges through it on Saturday. It ran great with no heat! It is plenty fast with my M445 for normal use. I ran it for 5 mins and only pulled 2500mAh from the batteries. I don't have a GPS to measure the speed, but it's scary fast. :buttrock: I can only run at full throttle for 5 seconds or so before the boat gets too far away. The hull is a proboat TC 31 with a TM 180 ESC and 5000mAh 40C 6s.


What would be a good high speed prop to try? I think it can take more than a M447 due to the lower rpm.
TJ904
10-07-2010, 12:11 PM
Can anyone help me out with choosing another prop? :confused1: I want to try one more prop this season and I'm unsure where to go next.
ray schrauwen
10-07-2010, 12:38 PM
An x450 that is detongued & S&B would be a good try next...
DISAR
10-08-2010, 02:02 AM
prather 225,230
447/3, 646, 646/3
m4a1usr
10-08-2010, 09:23 AM
prather 225,230
447/3, 646, 646/3

:thumbup1: Sounds right. Thats what my TC31 likes.

John
DISAR
10-08-2010, 10:41 AM
I don't have a TC31, but these are good props for this kind of rpm. Thanks!