PDA

View Full Version : Leopard 5692 choice


martin
09-18-2010, 10:42 AM
Going in a 41" DF type hull mainly for short max speed runs, Havnt decided yet on 8s or 10s so veiws on both setups. What differnce is their between the y & d motors, And suggestions on esc to use on a these motors (make, amps, type).
5692/2y 160a 5-9s 1090kv
5692/3y 110a 5-13s 730kv
5692/3d 110a 4-8s 1340kv
5692/4d 78a 5-10s 1000kv
Regards Martin.
martin
09-18-2010, 10:46 AM
Should of added what would be the best motor out of these for both 8s & 10s.
m4a1usr
09-18-2010, 11:24 AM
"D" windings can take more amps then "Y" windings. Thats proven by design. But what confuses people is comparison. Since we dont have a encompasing chart, like other manufacturers offer, the Leopard series of motors are a bit of an oddity in application right now.

Since you want "short, max speed runs" there is realy only one motor choice. Thats the 5692 1090kv 2Y on 8S. It offers you the max power from their advertised series of motors. Is there one better suited? Could be. Untill they share with us they decide to define their data for public offering its going to be a guessing game.

John
keithbradley
09-18-2010, 11:26 AM
The 730 is the only one I would run on anything over 9s personally. You could maybe run the 1000kv on 10s for very short speed passes but with its lower amp draw I would think you could make a faster boat out of the 730kv. I ran a Neu 2215 1.5y (1020kv) in my delta force copy with a swordfish 240HV and that esc worked great. I did run 10s for a short blast in mine and got into the 70's. 9s with a s240 prop had me in the mid 60's.
Hope that helps.

On 8s the 1090 would be a great choice.
martin
09-18-2010, 11:48 AM
Many thanks for replys, The 1090kv motor also seems to be the one more generally available to me to buy as well. With this motor on 8s how close is it to the limit on a Swordfish hv 240 or is it well within its capabilitys and be kind to this esc. Martin.
ray schrauwen
09-18-2010, 11:53 AM
" Untill they share with us they decide to define their data for public offering its going to be a guessing game. "

John

Guessing games are fun aren't they? :sarcasm1::tongue_smilie:
MOSQUITO6717
11-25-2010, 10:17 PM
Many thanks for replys, The 1090kv motor also seems to be the one more generally available to me to buy as well. With this motor on 8s how close is it to the limit on a Swordfish hv 240 or is it well within its capabilitys and be kind to this esc. Martin.

Hello , Have you used leopard 5692 1090KV , Any input will be appreciate. Thanks