Imax b6 charger

[Woodz]

i have just got my 4s 3000mah lipo and went to go and charge it and it gives me a low voltage error any1 have any exsperience with these chargers?????:help:

[Alfa Spirit]

Which voltage?

Power supply or LiPo voltage?

[Woodz]

i dont know i select balance on the on charger and 2 seconds later the charger says "INPUT VOL ERR" but it charges my 3s packs???????

[sailr]

Your power supply isn't supplying sufficient volts or amps for the 4S packs. What amps are you trying to charge them at?

[Woodz]

3 amp but i turn them down and try to balance them at 1 amp but stil dont work?

[sailr]

The message you are getting is for the power coming into the charger. What sort of power supply are you using? Hook the charger up to your car battery and see what happens.

[Woodz]

k ill try and im using a 12 volt mains?

[sailr]

yep, 12V input to the charger.

[Woodz]

just put it on car battery and its charging at 1 amp thnx so much

[sailr]

Yep. You need a new power supply if you want to charge off 110V!

[sailr]

You should be able to charge off the car battery at much higher amps.

I would suggest you get this charger. It's a bargain. Works GREAT and is both AC and DC. Best deal on the planet and cheaper than a decent power supply!

http://www.hobbypartz.com/thac6smbachw.html