PDA

View Full Version : New requirement for D12 Fast Electrics



Chilli
09-04-2010, 11:43 AM
Due to numerous complaints of Fast Electrics being too quite at district races. The District 12 director has mandated the use of a device that will replicate the sound of internal combustion engines during a heat. I was tasked by Don to develop the technology and after a brutal 15 minute R & D process:blink: came up with what I now call "The Finch Device". The Finch device will be required at all future D12 races.

Diegoboy
09-04-2010, 11:52 AM
:lol:

Pete32200
09-04-2010, 12:04 PM
Does it have to be the 2 of hearts or Can I use a different card ?

AndyKunz
09-04-2010, 12:10 PM
I don't think that card will last a full heat.

Andy

Doug Smock
09-04-2010, 12:35 PM
I don't think that card will last a full heat.

Andy

Too funny Mike!!
I think you're right Andy but it's a good first attempt, and it sure beats making engine sounds during the mill.:o

Perhaps if this continues to be a problem we could rely on you to provide us with a 90db sound card that could be tied into the ESC. I guess we'd need them to idle somewhere around 35 to 40db???:huh::biggrin:

Doug

egneg
09-04-2010, 12:39 PM
Did you use conformal coating?

don ferrette
09-04-2010, 04:53 PM
Hmmmm, not sure if that will pass the dB limit. :bounce:

hazegry
09-04-2010, 07:45 PM
lol thats funny

Chilli
09-04-2010, 10:48 PM
You gotta roll with the punches and have fun People!!! :thumbup:

Doug Smock
09-04-2010, 10:54 PM
You gotta roll with the punches and have fun People!!! :thumbup:

:beerchug::beerchug::beerchug::beerchug::thumbup:

prollins
09-07-2010, 06:15 PM
Hey I am all onboard for this. But unfortunately I used all my cards up building my JAE21 rigger (Spacers/sanding/sanding/and more sanding). Hey how about Taro cards then you can get a little insight into your heat.

:beerchug::beerchug::beerchug: