Tweet
Racers,
MMEU will be hosting our July club race this Sunday the 18th at Ford Park in Shelby Michigan. You can use the address for a McDonalds listed below. The park entrance is directly across the street.
7495 23 mile Rd
Utica Michigan, 48316
In an effort to stream line registration, I would ask that you contact me via email, phone, or Private Message (Rum Runner, Intlwaters, or Offshore electrics) letting me know what classes you plan to race. This will allow the preliminary creations of heats and should streamline the process of getting started with heat racing in the morning and be a great help to those organize things in the morning. In addition to creating heats, it will give us an estimate on number of racers that will be attending. Again, having this information is extremely helpful in know what equipment will need to be setup prior to the drivers’ meeting and heat racing starting. We ask that you be a NAMBA card holder and we do check.
Normal Classes as follows;
P-Limited Offshore (4min Heats)
P-Limited Hydro (LSH – 6 Lap Sprint)
P-Limited OPC (Tunnel – 6 Lap Sprint)
1/10 Scale Hydro (NAMBA rules apply – 6 Lap Sprint)
Q Sport Hydro (6 – Lap Sprint)
This week we have been requested to run a P-Limited Rigger and Open Hydro class in addition to our regularly scheduled classes. As long as we have 3+ boats entered we will make a class for it.
When replying please include the following information:
Name
Classes going to run
Radio frequency for each class
Please remember;
Registration Closes at 9:30
Drivers Meeting Starts at 9:45
Heat Racing Starts at 10:00
Thanks for everyone’s help, and please contact me if you have any questions.
Best regards,
Mike Ball
Mobile – 586-804-0520
Home – 248-629-6250
Email – [email protected]
MMEU will be hosting our July club race this Sunday the 18th at Ford Park in Shelby Michigan. You can use the address for a McDonalds listed below. The park entrance is directly across the street.
7495 23 mile Rd
Utica Michigan, 48316
In an effort to stream line registration, I would ask that you contact me via email, phone, or Private Message (Rum Runner, Intlwaters, or Offshore electrics) letting me know what classes you plan to race. This will allow the preliminary creations of heats and should streamline the process of getting started with heat racing in the morning and be a great help to those organize things in the morning. In addition to creating heats, it will give us an estimate on number of racers that will be attending. Again, having this information is extremely helpful in know what equipment will need to be setup prior to the drivers’ meeting and heat racing starting. We ask that you be a NAMBA card holder and we do check.
Normal Classes as follows;
P-Limited Offshore (4min Heats)
P-Limited Hydro (LSH – 6 Lap Sprint)
P-Limited OPC (Tunnel – 6 Lap Sprint)
1/10 Scale Hydro (NAMBA rules apply – 6 Lap Sprint)
Q Sport Hydro (6 – Lap Sprint)
This week we have been requested to run a P-Limited Rigger and Open Hydro class in addition to our regularly scheduled classes. As long as we have 3+ boats entered we will make a class for it.
When replying please include the following information:
Name
Classes going to run
Radio frequency for each class
Please remember;
Registration Closes at 9:30
Drivers Meeting Starts at 9:45
Heat Racing Starts at 10:00
Thanks for everyone’s help, and please contact me if you have any questions.
Best regards,
Mike Ball
Mobile – 586-804-0520
Home – 248-629-6250
Email – [email protected]
Comment