View Full Version : WTB - Mini V or C Steering Servo
Visual Perfection
06-26-2010, 12:39 AM
Hey guys
I purchased 3 Mini-C's and everyhing works great on them, except one of the steering servos doesn't work so I need a stock replacement.
I figured someone must have upgraded theirs to brushless and has some stock parts laying around, so if you have one that works please let me know!
Thank you!!!
HYDROJERRY
06-26-2010, 07:19 AM
I got one or two, trying to get rid of all mine and a complete mini-c,,,3 controllers, 3 esc units, 3 battery packs,,
Visual Perfection
06-26-2010, 10:30 AM
What would you be looking to get for the Servo?
HYDROJERRY
06-26-2010, 12:50 PM
How about(((FREE))),,does that work for ya...Nice avatar pic..
Visual Perfection
06-26-2010, 01:00 PM
Haha, That works for me yes. PM me and Let me know what postage is and your Paypal and I can send you payment.
Thanks a million!
And thanks for the compliment!
HYDROJERRY
06-26-2010, 01:21 PM
BTW what is that green boat..
egneg
06-26-2010, 01:55 PM
I got one or two, trying to get rid of all mine and a complete mini-c,,,3 controllers, 3 esc units, 3 battery packs,,
I could use a controller and a servo ... name you price.
HYDROJERRY
06-26-2010, 03:51 PM
I had two servos one is fine the other is stripped but tries to work,,well the good one goes to ''Visual''cuz he was first,PM me and we'll see what i got....
HYDROJERRY
06-26-2010, 04:00 PM
Some old parts left,,,,working servo taken,,
Visual Perfection
06-26-2010, 04:28 PM
egneg, they do sell a gear replacement kit for the servo's if you did take the one with stripped gears from hydro, I think they are like $5 from horizon.
damfurst
06-27-2010, 08:46 AM
It is possible to also take the servo apart & rotate the stripped gear so that it isn't on the stripped teeth part when it turns. I have done this on a couple of them and they worked fine for awhile afterwards.
egneg
06-27-2010, 09:56 AM
I don't think the servo is stripped as when it powers up it goes to the hard right and stays there. I am not sure though which one is bad as the servo has 4 wires so I can't put a different one in to check.
HYDROJERRY
06-27-2010, 11:08 AM
egneg, sent you a PM...
egneg
06-27-2010, 03:14 PM
egneg, sent you a PM...
Got it and sent a reply
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.