6S from 3-2S packs?

[Jeff Wohlt]

Can anyone show me how to get 6S out of my 3-2S packs?

[BHChieftain]

I've never done this, but wouldn't you do the following:


Lipo1 red to ESC red
Lipo1 black to Lipo2 red
Lipo2 black to Lipo3 red
Lipo3 black to ESC black

?

Chief

[G-UNIT]

well I guess you would need to make a new harness but I don't how to do it.
but I wold like to know also, good luck.

[JMSCARD]

Can anyone show me how to get 6S out of my 3-2S packs?

Here you go jeff.... just don't do it for a real high amp draw application...:)

http://www.offshoreelectrics.com/wiring.php

Go to this page then click on the 3 packs in series field...... I love this page that Steve has!!

[Jeff Wohlt]

Excellent...I even had that page bookmarked...should of known Steven would have something on his site!

Looks easy enough. Just wanted to try my MM on 6S with a 12Xl motor ...maybe even the 9 Xl///:buttrock:

[JMSCARD]

Excellent...I even had that page bookmarked...should of known Steven would have something on his site!

Looks easy enough. Just wanted to try my MM on 6S with a 12Xl motor ...maybe even the 9 Xl///:buttrock:

yeah its basically just like hooking up two in series and just adding another battery too..... 9xl on 6s.... jeesh prop down jeff.....:) way down..... sounds like something I would try....LOL.... and I go through esc's like some go through hatch tape...lOL

[sailr]

Use 5.5mm bullet connectors all the way through. Don't hard wire! That way if you have one of the three packs go bad, you can just unplug it and plug in a new one!

[Jeff Wohlt]

Thanks, Yes, 5.5 is all I run.

Okay...maybe not the 9Xl but the 12 should do it and turn a decent prop.