wtb 280

[nickm669]

Anyone have a feigao 280 they would let go. Or anything similar. Wanting 3000kv and up. Thanks. Nick

[Diegoboy]

280? or 380?

[nickm669]

Diego, I think I mean 280. 20mm. But, I am with you on the whole having so many fun project boats, that I never have one ready from a thread I will not mention. (unfortunately, I also understand the wife thing.). Anyway, I like micros, so there are many places I could stick a 380 too! Whatca got?

[Diegoboy]

Meniscus has a brand new 20mm ammo in package. He just cannot locate it. I will look at what I have available when I get home...

[Meniscus]

Meniscus has a brand new 20mm ammo in package. He just cannot locate it...

This is very true and it is brand new, never taken out of the clamshell. I have a few more places to look.

Here's the specs on the one I have....somewhere :laugh:

Ammo 20-40-3500
20mm diameter
40mm length
3500kv
2-3S Lipo
Weighs in at a mere 55grams.

That is if you indeed are looking for a 20mm and not something a little larger. I have 28mm one I could let go. Diego may have something that would work for you as well.

[nickm669]

I forgot about ammo. Very interested. Actually interested in everything. I like having options. Let me know. Thanks

[Meniscus]

I'll go through and see what I wouldn't mind letting go. I know I could let these go:

I have a Turnigy Outrunner/Inrunner which is an outrunner in a can that measures 26-28mm at 2600kv. It works well for micros as it won't chew up anything that comes in contact with the can since it's enclosed. I haven't used it much and got it from Diego. He can probably tell you more about it.

I also have a Mile High RC 400F at 2150KV (http://www.milehighrc.com/brushless400FA.html) if you are interested.

Others to follow when I look tonight.

EDIT: the Turnigy Outrunner/Inrunner may be Align vice Turnigy. I'll confirm this evening.

[mike martin]

i have 2 3600 kv and one 4200 kv chilly pepper motors i'll send you all 3 for 20.00

[nickm669]

pm sent. Thanks mike

[nickm669]

Still very interested in the in and out runner.

[Meniscus]

OK, found the Ammo 20-40-3500. Here's a picture:

23585

Standby while I take a picture of the outrunner in a can.

[Meniscus]

The first picture is the Align motor. When examining the label on the end of the motor, it states 2500KV and the model is 400LF.

23586

These pictures are of the Mile High RC 400F at 2150KV. Note that the previous owner went a little crazy with the dremel to create a flat spot for the coupler/collet to get a good bite on. I've used it before and it has worked well.

23587 23588

[nickm669]

I like the canned outrunner and ammo. Let me know what your thinking on price.

[nickm669]

Sorry. Just cleaned out my inbox

[Meniscus]

I'd say:

$35 shipped for Ammo.
$20 shipped for the Align.

$45 shipped for both to the lower 48.

[nickm669]

pm sent

[JMSCARD]

I have a brand new, two week old, no connectors ever soldered on, medusa research afterburner series 28mm 3400kv motor with the 3.17 output shaft....this is an inrunner.... I bought for another project for $79 plus shippin... Won't be going ahead with it.... I'd sell it for $50 shipped in the U.S.... This is a high end little duffer and should make something move out nicely..... It's rated to 60,000 rpm. Comes in original box and I have a pic on my iPhone I can send to you if you would like to see it...

I also have a small outrunner that I somehow aquired I would throw in for another $15.....Got it from a heli guy... He had a bunch of trex stuff.... 600's down to 250's.... This one I would imagine obviously may have been a 250 motor but I am not sure.... I am not a heli guy... Well actually I tried to be, but that another "long and painful" story... Lol... Don't know the specs but looks basically new and seems to be in the same size range, might work for a other of your projects?

[nickm669]

Jmscard, just wondering if you got my pm. Sometimes they don't go through when I use my phone to send. Didn't want to think that I don't respond. Thanks

[JMSCARD]

No i got it... If it's the pm u sent saying waiting til next week? Thanks for the follow up though....and take care!

[Dale Koblitz]

I have a feigao 380 I think it is. It's about the same diameter as the stock mini-v motor just slightly skinnier. I got it for a mini-v but it was way to much for the hull. It's like 4500kv I believe. lmk if your interested and I'll figure out exactly what it is.

[nickm669]

Dale, thanks for the offer, but I actually have a feigao 380s 12 turn that I used for the first time today. It's in a 22 inch maus microbullet. I thought it would be too small. Turns out this thing was a rocket. I greatly underestimated the little motor. The motor you have is way more than my little boat could handle. Thanks again. Nick

[nickm669]

Mike, motors showed up yesturday. Thanks again. Exactly what I was looking for.

[Meniscus]

Looks like you should have the ones I sent today.

[nickm669]

Maybe! I was sleeping off a long night, and missed the ups guy.