PDA

View Full Version : WTB FE Rigger Hull, Hardware, Servo installed, possibly motor too!



JMSCARD
03-20-2010, 03:23 PM
I am looking for a Rigger to play with... Electric Only.... basically all ready for my electrics as I like to play with my toys rather then build them (I work 70 hours a week)

Prefer a Hull with Hardware and if servo is already there and lined up for the boat thats great too..... if someone has one with a motor set up for the boat that is fine too.... I don't need any esc's though as I have plenty (4 turnigy 180's sitting doing nothing)

old guy
03-20-2010, 04:06 PM
What are you looking for a small one or a medium sized one and how much are you willing to spend? the more you spend the better you get.
Old Guy
I have 2 but need to know what you want and how much you want to spend

JMSCARD
03-20-2010, 04:27 PM
Give me both options:) I don't want to race them but I do want it to be very fast:) and handle well.... I don't want to spend a ton of money.... Let me know what u have and the asking price and condition I will let you know if I'm interested.... Also let me know what kind of power you recomment (motor/lipo voltage) so I can see if I have the proper equipment for them..... I should have plenty of lipos.... I have wayyyy to many... I have larger esc's too if the rigger requires as hv esc:) and I have a 2250 lehner 12t among other fiegos sitting around... Thanks again!

detox
03-20-2010, 08:34 PM
Here are pictures of Rigger Insanity

MRotch
03-21-2010, 08:32 AM
What are the dimensions on that Rigger, Detox?
What are the specs on the gear - motor/esc/battery/prop?

Thanks much,
Mike

detox
03-21-2010, 08:48 AM
What are the dimensions on that Rigger, Detox?
What are the specs on the gear - motor/esc/battery/prop?

Thanks much,
Mike

OSE sells this kit . Here are the deminsions.

http://www.offshoreelectrics.com/proddetail.php?prod=osb-rigged-insanity

It has Solinger hardware installed with Octura Collet and Wire drive, SV 27 motor/esc, Auquacraft servo. You add prop, 4s lipo and go. I will also include Auquacraft AM radio and receiver.

JMSCARD
03-21-2010, 11:21 AM
How many dollars shipped to me detox? You can keep the radio.. I am 2.4 ghz.... Thank u for the offer of throwing it in tho....

detox
03-21-2010, 11:35 AM
$220.00

JMSCARD
03-21-2010, 11:49 AM
What is the speed of the boat with the sv27 power pkg... What prop does the boat work well with?

detox
03-21-2010, 12:32 PM
What is the speed of the boat with the sv27 power pkg... What prop does the boat work well with?

I never did alot of prop testing using SV27 combo. I am guessing 45mph using Octura m445. Will go faster using a better matched prop. To go faster you will need atleast the 540 8XL motor.

JMSCARD
03-21-2010, 01:48 PM
I have ALOT of 40-60 mph boats.... I am honestly am wanting a rigger because I want it to be silly fast..... I have a nemesis 10xl sitting around..along with a 9xl feigo... Also a bunch of turnigy 180 marine speedos.... You say to run it on 8xl... Will that get it to 70? I want it to really go.... Would you sell it less the sv27 esc/motor as I'm sure you know you could easily sell those two items quickly also... I just have no use for them because I want it to be much faster then 45mph.... I really want to scare the fish...:)

detox
03-21-2010, 02:03 PM
Yes I will sell it less SV27 motor/esc. $180.00 shipped.

detox
03-21-2010, 02:08 PM
You say to run it on 8xl... Will that get it to 70? I want it to really go....

No...You will need different combo. Not sure what you will need to go that fast.

Chuck E Cheese
03-21-2010, 05:31 PM
i highly recomend the JAE 21FE. it is solid mid 50's on UL-1 set-up. if you want silly fast you are going to go with a 1415 or 1515 1y and then battery size is an issue in riggers. a 10xl needs to be 6s to be fast and from what i have seen in mono's they burn up unless it is a full saw set-up.

http://www.youtube.com/watch?v=jLg1qhhPU3E

tth
03-21-2010, 05:49 PM
Here is my old Dumas Hawk 3.5 kit that I traded a while back. She ran solid 70+ every time out. Setup was Feigao 10xl, Etti 150 w/o bec, Poly RC lipos 6s 6000mah, it had Marine Specialites Hardware on it when I got it. She was a beast and the kit has good stiff wood to build with too. It was kind of a bugger in the corners but straits were a blur!!!! I have been thinking of the JAE FE kit but all my extra $$$ is going to the rigger in my avatar and also a new Skunkworks Twin Cat. I hope you enjoy the clip!!!

bTPkO1Ei8UU

old guy
03-21-2010, 07:08 PM
If you want to go fast it 's $$$$$ that will get you there if not you get smoke. here is one to look at

http://www.offshoreelectrics.com/forums/showthread.php?t=4694&highlight=krabs

JMSCARD
03-21-2010, 07:48 PM
I am prepared to spend some money.... The less the better tho given the state of the economy... And being in the automobile business:) l and I do have alot of the support equipment too... I also have a new lehner 2250 12t if anyone has any ideas of something I can use that in? Probably a big rigger huh?

bigpapa
03-21-2010, 11:23 PM
Hmmmmmmm nice boat tracy..............

bigpapa
03-21-2010, 11:24 PM
lol how u been my friend

tth
03-21-2010, 11:26 PM
Doing well sir how bout yourself?

bigpapa
03-21-2010, 11:28 PM
busy gettin boats reaady for the water, luv the rigger in the profile pic

JMSCARD
03-22-2010, 12:30 PM
Just wanted to let everyone know that I may be putting the rigger on hold as It looks as though I am going to spend lots more money with Mike Martin on one of his boats he hasn't listed yet.... Thanks for everyones help on this..... I am getting a rigger at some point but after what looks like another expensive day on the computer and mikes good deals I am gonna have to hold off for a couple weeks til I can replenish my checking account!!

HYDROJERRY
03-22-2010, 08:33 PM
I have a Blizzard Ultra-X 24'' i will trade you for a faigeo 9xl if you want,,,

HYDROJERRY
03-22-2010, 08:57 PM
Heres some pics, remember i want to keep my motor and cooling jaket,esc,rx and servo,,,,You will get hull 89.00,turn fin 17.99,complete Hughes hardware 35.99. No prop,,,

JMSCARD
03-22-2010, 09:52 PM
Sounds ok with me the motor is in my pip triton.... I bought it with low use of rumrunnerracing... It runs so strong it snapped the flexshaft on my triton first run out ... I can take a pic of the motor... It has a water jacket sealed to it..... Give me your cell number and I will shoot u a pic from my iPhone? You can pm me your cell number...