Decal Graphics - NO COST

[CornelP]

Well guys, having received a number of requests for various graphics, I can actually help with the graphics only, as the vinyl stickers will be to impractical to send from here...
Of course I keep my principle of helping out, so there will be no charge. Just give me the target graphic and size, I'll do Corel vectoring, ready for the cutter or printer (for water decals).

Cornel

[old guy]

Hi can you do a 1/8 bud?
Old guy

[CornelP]

A bit of digging and I got this. I need to knoe the size of these stickers and how you want to do them. The first picture shows how to do it for a printer (preferably ALPS, can print white on decals or a cutter/printer). The second is for a vinyl sticker (need to work another bit on it). For this one, you need to cut one black, one white and stick them one on top of the other, for the shading. If you know the sizes and how you want to do them, I only need an email address

[old guy]

Hi looking for the U1 Bud T5 year 2000
Thanks Old Guy

[CornelP]

As far as I could dig out, the difference to what I posted earlier is the shading, which is on blue, not black and it has another big "1" on the canopy (same for T3, T5 and T6). Still looking for the correct font for "Dave Villwock" ...

[LiPo Power]

I have a quastion .....
If I will provide you with Jpg file would you be able to create decalls for me for yellow background UL-1, DF-33, DF-29?
Thank You
Robert

[Brushless55]

not sure if I get this?
are you setting up and cutting decals for free?

[LiPo Power]

...good quastion.....

[CornelP]

What I can do is just graphics, not cutting, as it is very impractical... I will be sending the files by email, so the model can be cut in any vinyl cutting shop or printer.
Robert, if you have a scan, I can make a file good enough for printing, but not do the print.

[LiPo Power]

What I can do is just graphics, not cutting, as it is very impractical... I will be sending the files by email, so the model can be cut in any vinyl cutting shop or printer.
Robert, if you have a scan, I can make a file good enough for printing, but not do the print.

I see... My file is good for printing, thank you for respond.
Robert

[FE Wannabe]

Cornel,

Thanks for offering your services.

Can you create a vinyl cutter based graphic file for the attached file?
If the resolution is not good enough, I can e-mail you the original .jpg file.
This will be going on my UL-72 based sport hydro.
I will pm you with my e-mail address and the dimensions.

Thanks again,
Brad

[CornelP]

Brad, you've got mail.... :biggrin:

[FE Wannabe]

Cornel,

Thanks for creating the Corel file for me. It is appreciated!
Let me know if I can return the favor sometime.
Brad

[AndyKunz]

This will be going on my UL-72 based sport hydro.

Brad,

What are you using for the UL-72 hull?

Andy

[sailr]

Great service guys! I too use Corel extensively. Even when using autotrace of a bitmap, corel still requires some cleanup. Very time consuming. Cornel is being most gracious in his offer!

[FE Wannabe]

Andy,

It is Randy's (BBY) ABS version of your original UL-1 hull.
I am going to paint it red and use these decals to make it look like last year's UL-72 boat that won the Unlimited Lights Championship.
Brad

[CornelP]

I've been working on this today, so if anybody is interested, I can send the Corel file for cutting/printing (please specify which one)

[HYDROJERRY]

Hay Cornelp looks cool, i was mainly after the oval shapped one same basic picture and color but inside a gray oval,,good work thow,,:thumbup:

[CornelP]

I'll change the color tomorrow... I have the original file in the office

[Alfa Spirit]

If you need logos

http://img225.imageshack.us/img225/2513/ahydroliftlogo3.jpg

http://img27.imageshack.us/img27/9441/ahydroliftlogo.jpg

http://img185.imageshack.us/img185/5342/astickerdrapeauxdamiers.jpg

[domwilson]

As far as I could dig out, the difference to what I posted earlier is the shading, which is on blue, not black and it has another big "1" on the canopy (same for T3, T5 and T6). Still looking for the correct font for "Dave Villwock" ...

Can you do one in the same font as the Budweiser only to say Miss Understood, Bad Reputation or Miss Management?

This is a genuine request.
Thanks in Advance.

[CornelP]

Here you go...

The sample is a Jpeg, the zip is the Corel file. You can scale it yourself or you can give me the sizes and I'll do it...

[domwilson]

Looks good. Thank you.

[CornelP]

BTW, the font is called "Brew Master", it's free on the net... :)

[domwilson]

Got it. Thanks.

[Brushless55]

what about masking for paint?
I found a sweet paint job I would like to try on my new Cat

[CornelP]

I can definitely try... I've done some for 1:1 jobs, so it's just scaling down. If you know of any Oracal dealer in your area, I can recommend a good masking vinyl that can be cut like any other sticker, but it peels perfectly and is very thin.

[Alfa Spirit]

Thanks, that' s nice, my cat needs a bigger one for the front

http://img684.imageshack.us/img684/6628/temp370.jpg

[tomstoys2]

Hey Cornel,
Can you do those flags from the Genesis? I would need them about 3 inches long.
Thanks,
Tom



Thanks, that' s nice, my cat needs a bigger one for the front

http://img684.imageshack.us/img684/6628/temp370.jpg

[dddmx3]

Monster Energy?

[CornelP]

Sorru guys, I've fallen a bit behind with the requests... somehow I don't get an email anymore from this thread...

A new one for review...

[BakedMopar]

Nice! Pm sent

[Shooter]

Now that the vultures are distracted over here there should be some good deals in the swap shop!! :laugh:

Cornel - Great thing you are doing here! :thumbup:

[FighterCat57]

I'd like to get an image of the words "Many Sparkle Many Happy" (about 2" tall) in a Bling Bling type font. With the Diamonds and Starbursts on the edges.

:bounce:

[steve-b]

"sorosis of the river"

Just kidding... Would be a pretty funny name for a boat though.

[CornelP]

Something like this?

[CornelP]

Here's the final version of the Hawaii Ka'i.

[CornelP]

Tom, attached are the flags in jpeg. Tell me what format you need them... this is based on the Aqua Mania graphic posted by Alfa.

[tomstoys2]

Looks great Cornel. :hug1: I'm going to have vinyl decals printed. JPG?
Thanks,
Tom

[FighterCat57]

Something like this?

That's it! I'll PM you my email. :thumbup1:

[BakedMopar]

Looks great Cornel!

Mahalo

[FighterCat57]

Something like this?

Any chance I can get the png/psd?

Getting ready to have it printed for a new hull. :thumbup1:

(if you could add FighterCat57 that would be cool)

[CornelP]

Sorry for the delay guys, I was out of town... got a service call 400km away to change a fuse... after seeing the invoice, they will check better next time! :p
Will finish everything in the next 1-2 days.

[CornelP]

Flags are done in both corel draw and jpg format. Zipfile attached

[Alfa Spirit]

Enjoy!

http://img295.imageshack.us/img295/7423/aquamaniaoriginal.png

http://img840.imageshack.us/img840/777/temp20.jpg

[CornelP]

... I should add here the G3 in Corel format... :p

[tomstoys2]

Flags are done in both corel draw and jpg format. Zipfile attached

Awsome!!!! Thank you both. :bowdown:
Tom

[old guy]

Hi can you do a 1/8 bud?
Old guy

Hi remember back at post 2 lol this is what I need 1/8 scale for t-5 but and 1/10 scale twin wing from H&M if you can that would be good and there is no rush
Thanks Rick:beerchug:

[CornelP]

Hi Rick, I could not find anything newer than what I already posted... If you tell me the size of the final product, I'll upload the correct file.
If you have any links to show me what you are looking for, it would be very helpful.

Cornel

[bonewar]

Cornelp,

Hi there.
Was wondering if you could make me a graphic
Which uses my avatar and with the words - BONE WORKS -
under the skull . Rapped around the skull like they do for tattoos.

Thanks mate

Rick :rockon2:

[CornelP]

I'll start on it right now...

[bonewar]

I'll start on it right now...



CHEERS. :thumbup1:



Bonewar :rockon2:

[CornelP]

Have a look at these and choose... or change.

[bonewar]

Have a look at these and choose... or change.



Very nice,

I really like the 3rd picture. :thumbup1:

I'll take it .


Thanks mate.

Rick :rockon2:

[CornelP]

Here's a bigger version, better resolution.

[bonewar]

Here's a bigger version, better resolution.


Thank you my friend. :thumbup:

I owe you 1 .






Bonewar :rockon2:

[88cr250]

okay i see all the "bud" things on hear so i have to do it... lol

http://i490.photobucket.com/albums/rr261/04241122/DSC06390.jpg

[CornelP]

Looks like a mix of Foose Design, Scrapheap Challenge and the Kustomizer...

[Ronbo]

Hi,
Im having a hard time finding a good Miss Seattle, the Number U-37. Both from 2006. The U-37 is too small on website, and Im not sure what font it is.

Also, I cant seem to find a good Miss Chrysler Jeep like on the u-3. I have the badge, but not the lettering of Miss Chyrsler Jeep.

Both 1/10th scale.

[CornelP]

I'll take a look and see what I can find... :D

[dddmx3]

Listen, I'm building a mono delta 29 boat. I need some decals...

my site: www.LFSwear.com
I want my own design is that possible?

[Boomer]

I don't know how to get you you the orginal art for the Bud' Select race boat, but I am hoping to come up with the digital art to create the decals with. I have a attached a number of pictures of several different RC boats with the same art work.
The boat I am hoping make one of my 30" long boat into a Budweiser Select (Miss Geico) Let me know what you would need from me and if this is possible.
Thank you
Boomer

[monojeff]

Listen, I'm build a mono delta 29 boat. I need some decals...

my site: www.LFSwear.com
I want my own design is that possible?

What are you looking for?
I can make you anything you need.




I don't know how to get you you the orginal art for the Bud' Select race boat, but I am hoping to come up with the digital art to create the decals with. I have a attached a number of pictures of several different RC boats with the same art work.
The boat I am hoping make one of my 30" long boat into a Budweiser Select (Miss Geico) Let me know what you would need from me and if this is possible.
Thank you
Boomer

Boomer do you need the digital graphics for this boat?
I have them if you need them let me know.

[Boomer]

Yes Sir. I am in the process of painting the hull and will be at a point soon to apply the decals. What can I do to help?? I will send you my email address.
Thank you
Boomer

[dddmx3]

How much $$$$?

[CornelP]

How much $$$$?

Still free for the graphics...

@dddmx3: easy with the decals, just send me a draft and I'll get something up.

@boomer: I can do the logos, but the background needs to be done either by wrap or airbrush.

[Boomer]

The paint work is inclusive of the red and black. The decals will be applied over the finished paint work. The plan would be to apply clear coat to the boat once the decals are in place to protect them.
Thank you
Boomer

[CornelP]

Well, I have the bud logo done already, the "select" will be easy. same with the 11. Do you have a rough size for these? I'll post some samples later on, I'm just leaving the office now...

[Boomer]

I will measure the areas on the boat and get that info to you.
Thanks again
Boomer

[dddmx3]

oh wow.. free? niceee...
I'd have to think something up.
I'm going to finish my boat first, then I'll get some of your decals :)

[Boomer]

Cornel Sir,
Here are the are some dimensions for the boat I am hoping will turn out as well as the ones in the pictures I posted in my previous message.
The hull width is 10 1/2" across
The Miss Geico decal is 12 1/4" long and the hulls width at that point is 2 1/2" from the bottom edge of the sponson to the should of the deck.
The MG decal is 1 1/2" wide
The distance from the rear of the hatch lip to the end of the rudder bracket is
1 3/4" and the distance from the same lip to the end of the transom is 1 1/2"
I will post another picture and measurement of the canopy on the next post.
There is 5 picture limit.
Boomer

[Boomer]

Conrnel
Here is the last of the measurements I thought you would need. If you need more or other measurements just let me know
Thank you
Boomer


The canopy is 7" at the spot where the top of the ruler is. It tapers down a bit ,and gets wider as you look forward.

[Kevinlei324]

I have yellow Mean Machine... Any suggestions or anything you already have that would fit it? It's completely BLANK now!

Thanks!

[teamchrome]

I have yellow Mean Machine... Any suggestions or anything you already have that would fit it? It's completely BLANK now!

Thanks!

Ya, what he said..

[buzzbait00]

I shure would like a wind shield for a DF26.

[dddmx3]

Got any decals that would fit a 37" Genesis?

[CornelP]

Ok guys, just came back from a business trip... will start doing some work.
A reminder: if you want the actual decal, you should either take the graphics I post to a local vinyl shop or contact monojeff (just above). He has the tools and knowledge to do the wraps (looks even better than paint...) and he can also ship a lot cheaper... :P

[CornelP]

Boomer, sorry for the delay. See if these look right to you as proportions. The one on the back has to be split to be really visible.
The Budweiser text is done with the original Bud Select font, not the one in the samples you posted. See the difference in the attached.

[CornelP]

@ddmx: not yet, but I'm getting a Fightercat Daytona (the same hull) and I'll do something for that...

[Alexgar]

can you do a 4" cartman, my neighbor is a sign maker and has the goods to cut

[CornelP]

If you give me a reference photo, yes. Otherwise it's quite complicated to choose a pose...
Then you have to tell me if you want outline only for a vinyl cut or full color for printing.

[Alexgar]

can you pm an email i cant post a hi rez here

[sailr]

How do you make the decals? Are they printed, cut, ??

[monojeff]

How do you make the decals? Are they printed, cut, ??

Some are printed like a complete wrap wold be a large square or rectangular shape.
Others are cut letters.
Then you have digital contour cut letters that are printed and then cut around them.

Hope this answered your question some.

[Boomer]

MonoJeff
Cornel has graciously created the artwork I needed for the decals for my boat. I am sorry if I seem confused about who does what. It must be an age thing, so please bare with me here.

It sounds like you are able to make the actual decals from the proper artwork. If that is correct, can I send the artwork the Cornel ginned up for me? Please let me know and what the tarriff would be for the a set or two of the decals. (Budweiser Select, number 11 and the crown as seen in the pictures in my earlier post.) PM or email me at rharcflash@aol.com
Thank you -
Boomer

[monojeff]

MonoJeff
Cornel has graciously created the artwork I needed for the decals for my boat. I am sorry if I seem confused about who does what. It must be an age thing, so please bare with me here.

It sounds like you are able to make the actual decals from the proper artwork. If that is correct, can I send the artwork the Cornel ginned up for me? Please let me know and what the tarriff would be for the a set or two of the decals. (Budweiser Select, number 11 and the crown as seen in the pictures in my earlier post.) PM or email me at rharcflash@aol.com
Thank you -
Boomer

Sent you an email.

Yes I can make any and all decals & wraps.

[monojeff]

Ok guys, just came back from a business trip... will start doing some work.
A reminder: if you want the actual decal, you should either take the graphics I post to a local vinyl shop or contact monojeff (just above). He has the tools and knowledge to do the wraps (looks even better than paint...) and he can also ship a lot cheaper... :P

Thanks Cornel for the shout out.

I just tried to open the files you sent to Boomer for whatever reason had some issues and the eps file didn't want to open. One thing to do in the future is to make sure no fonts are embedded and change them to curves/outlines to make things easier to open and nothing gets adjusted when opened.

I already had the bud select logos so I just used the jpeg for reference.

Not sure how they were saved but something to keep in mind.

[CornelP]

You're welcome.
I did forget to convert to curves... I'll just try again, it could be ok this time.
Most of the time I use Corel, so I'm not really used to eps format requirements.

ps: the file is quite large, even zipped, so I gave up trying...

[monojeff]

No worries like I said I just remade it using the jpeg you made for reference.
Not sure why it was so large but the file type I would recommend giving to people is a pdf with everything converted to outlines. Usually is a bit smaller then a eps file.

[dddmx3]

Alright so I made up some designs, tell me if it's possible to make them.
I can send you .eps file of the designs...

Please review the attachments. :buttrock:

[Dangerous_Toys]

Hey Cornel, I have a design I need made in an eps file format. Let me know what you can do. Here is the graphics.....

http://i37.photobucket.com/albums/e90/Dangerous_Toyz/bec4a485.jpg

[monojeff]

Alright so I made up some designs, tell me if it's possible to make them.
I can send you .eps file of the designs...

Please review the attachments. :buttrock:

Would not be a problem to get these made up.
I'll PM you on we can discuss details.

Just to make sure everyone is clear on this thread.
Cornell is offering free graphics for people.

I can make any and all decals/wraps, not for free but I will give you a good price!

[CornelP]

Thanks for clearing that out, Jeff. I would probably do the decals very cheap also, but the shipping would be 10 times the cost...

I'll get going on the red baron file.

[dddmx3]

I'm pm'ing monojeff right now. Connell how much would shipping be to Portland, OR?

[monojeff]

Thanks for clearing that out, Jeff. I would probably do the decals very cheap also, but the shipping would be 10 times the cost...

I'll get going on the red baron file.

He sent over a larger version to me & already got it done for him so don't want you to waste your time on it.

Appreciate you letting me be a part of your thread.

Wasn't my intention just kinda happened.

[CornelP]

Well, I'm working on the trace for the one you posted, but I also found this on the net... seems to be the current logo.

[Dangerous_Toys]

I'll get going on the red baron file.

Hey Cornel, No need to work on that file. Monojeff is taking care of the complete decals for me. Thanks!

[CornelP]

You beat me to it... :p

No problems, I was looking for somebody to do this, as most of the guys in sign shops will not be very careful with small jobs like this.
One quick question: what do you use as material for he wraps? I tried the Oracal 970, but it's a pain to pull, even at high temperature...

[CornelP]

I'm pm'ing monojeff right now. Connell how much would shipping be to Portland, OR?

Envelope with documents to the US by normal post is around 20$. Anything close to express and it's double that...

[monojeff]

You beat me to it... :p

No problems, I was looking for somebody to do this, as most of the guys in sign shops will not be very careful with small jobs like this.
One quick question: what do you use as material for he wraps? I tried the Oracal 970, but it's a pain to pull, even at high temperature...

Usually 3M Scotchcal Series IJ40 for the digital stuff

[dddmx3]

Wow. That's cool your doing decals for free, but your right about the shipping(:

[dddmx3]

Jeff's making me some decals! I'm so excited!
I sent him the payment just now! Very good price for 2 vinyl decal sheets! Definitely going to recommend him to a friend!

[HYDROJERRY]

He did some realy nice ones for my brother checkout chud's mini mystic build thread...

[dddmx3]

Yeah their good decals but I think the lightbulb on top needs more work. You kinda have to look at it until you get that it's a lightbulb! :p

[HYDROJERRY]

Yeah even on the factory race boat i didnt realize it was a lightbulb,, so with that thought i think he did just like the real boat,,,and Jeff's decals are perfect.. You realy need to see his decals in person to see the quality...

[monojeff]

Yeah their good decals but I think the lightbulb on top needs more work. You kinda have to look at it until you get that it's a lightbulb! :p

The lightbulb is exactly the same as the factory race boat.
Everything is pretty much exactly to scale.

[dddmx3]

Well idk.. Maybe it is good I just didn't see it that well in
The pics..

[monojeff]

No worries.

Here are some pics for everyone to check out.

Full size Miss Longlite & Chuds Scale Mini Mystic Miss Longlite

[dddmx3]

Nice nice...

[sailr]

I have a question about your graphics. Can you print white? or does white have to happen by default by a clear area over a white surface?

[monojeff]

I have a question about your graphics. Can you print white? or does white have to happen by default by a clear area over a white surface?

First let me ask what are you trying to accomplish with the white printing?

Typically the only reason to print with a white would be if the decals were being printed on a clear surface. Like a window cling or clear vinyl.
So with that said rarely is there a need to print white.

White is the default color of vinyl we use to print decals & wraps & you can cut away (contour cut) any white background that you don't want so there is only the colors that were printed showing.

The attached photo is a door skin on a mini truck that was printed & contour cut so it has no background.

[sailr]

OK. I had no idea if you were printing on vinyl or what. That explains it! Thanks! I'm gonna need a graphic that goes on a black background that has white in it. I'm doing a 1/10th scale 1985 Coors Light U-100 hydro. Once I figure out the exact size I need it, I'll send you the artwork. Here's a jpg of it.



Thanks!

[monojeff]

Sounds good keep me posted.

I do both printed decal & wraps as well as regular cut letters & decals in any & all colors.

As well as Banners, Full size vehicle decals & wraps & more.

I'm about to start on a 1/10 scale U-1 Miss Budweiser Build in the next month or so.
Hope you start a build thread on yours.

[sailr]

Cool! I drool over that equipment! I'm a graphic designer in my spare time. I brokered with a shop in Tampa that did all that until they went out of business. Just zeroed in on a new one a short distance from me that will do broker deals. It's a fun business but times are tough everywhere. Hope you are doing well! I will figure out the size for those Coors logos soon. What format do you prefer? I mostly use CorelDRAW. I can convert to any format you like.

What is the thinnest material you can print on so it doesn't take so many coats of clear to hide the edges? THANKS!!

[monojeff]

The vinyl that is printed on is 2-3mil thick.
Typically it gets laminated but if your going to clear over it then this doesn't need to be done so it is as thin as possible for you.

EPS file is best or PDF just make sure it is in vector format.
If not then high resolution jpeg or pdf is fine & I can work with that as well.
I already have the coors logos if you need them let me know so you can size them the way you want.

[sailr]

Thanks. I don't think I have the Coors Light logo in Vector. All I could find are bitmaps. Do you have the Coors Light logo like I posted here? If so, that's great. All I need to give you is the dimensions. I'll try to get to that later this week. I suspect the printing is a bit delicate if not laminated so care has to be taken until they are cleared?

[monojeff]

Yes I have the same logo you posted.
All I would need are the dimensions.

Yes it is a lot easier to stretch it & or scratch it but it would typically be masked to protect this from happening until you got it on the desired surface.

PM me when your ready & we can discuss details.

[dano1]

I have a red hull hydro thats a miss vegas aquacraft 1/12 scale, would like miss snap on on the sponsons and two more smaller for the cowl and one across rear fin, pm me on prices please.

Thanks

dano

[monojeff]

I have a red hull hydro thats a miss vegas aquacraft 1/12 scale, would like miss snap on on the sponsons and two more smaller for the cowl and one across rear fin, pm me on prices please.

Thanks

dano

PM sent

[sailr]

sounds good!


Yes I have the same logo you posted.
All I would need are the dimensions.

Yes it is a lot easier to stretch it & or scratch it but it would typically be masked to protect this from happening until you got it on the desired surface.

PM me when your ready & we can discuss details.

[FighterCat57]

He he.

[dddmx3]

Thanks jeff!
The vinyls are perfect! :cool2:

[monojeff]

Thanks jeff!
The vinyls are perfect! :cool2:

Nice look good. :thumbup1:

[Dangerous_Toys]

Thanks Jeff. So far so good! Gonna need some more to finish her up...I'll let you know when I figure it out as to what I want.
http://i37.photobucket.com/albums/e90/Dangerous_Toyz/RC%20Boats/4950336f.jpghttp://i37.photobucket.com/albums/e90/Dangerous_Toyz/RC%20Boats/76989b46.jpg
http://i37.photobucket.com/albums/e90/Dangerous_Toyz/RC%20Boats/88768129.jpghttp://i37.photobucket.com/albums/e90/Dangerous_Toyz/RC%20Boats/356298f2.jpg

[monojeff]

Thanks Jeff. So far so good! Gonna need some more to finish her up...I'll let you know when I figure it out as to what I want.


Nice!! Love the striping on the boat!!

[Brushless55]

Wow!
awesome job Jeff :thumbup1:

[monojeff]

Wow!
awesome job Jeff :thumbup1:

I'd like to take credit for the striping but I didn't do it.
I made the red baron, flags by the driver & + symbol.

[tomstoys2]

Hey Cornel,
I am working on repainting a FasTech for my daughter Fuchsia Pink. She is going to be outfitting it with Polly Pocket dolls and calling it the "Polly Rocket". I am in need of some graphics.
These are a couple things I grabbed off the wed. I'm not sure it they can be change to Polly Rocket? The other idea we talked about was a Polly Pocket on a Rocket.
Anything you can come up with would be most appreciated.
Tom

[CornelP]

I'll give it a try...

[CornelP]

Take one... exporting to jpeg changes colors, the original file will have the correct ones

[tomstoys2]

Looks good. Can you try with a "R" in Rocket?
Thanks,
Tom

[CornelP]

Take two

[tomstoys2]

Nice work my friend! :thumbup1:
I'm going to have Jeff do up the vinyl decals.
Any thought on how I could do something up with Polly on a Rocket? I couldn't find anything on the web that would work. I know, I'm really pushing it.:doh:

[CornelP]

No worries, I'll find the time to do it...

[marko500]

Tom, took my 17 yr old son to the doctor today for his yearly physical. Turns out he needed some shots. On the way out, with a packed waiting room, I asked the nurse if she had any Polly Pocket stickers. I thought my son was going to KILL me. When we got outside I explained why I asked to him. I think he's finally starting to calm down, he actually laughed about it. Anyways all the doctor had were Hannah Montana and Justin Bieber stickers. Who the heck is this Justin person,:confused1: am I missing something only having 2 teenage sons?:noidea:

Mark

[tomstoys2]

Thanks for the effort Mark! That's pretty funny.

No rush Cornel, I can't paint until this snow stops anyway.
Tom

[CornelP]

If you're going to have a wrap, you might need something closer to this :p

[tomstoys2]

Cornel your work is truly amazing! :hug1: I can't wait to show Nicole today when she gets home from school.
I like the wrap idea.
Tom

[CornelP]

No problem, my pleasure to change subject from time to time... When you decide, I can send Jeff the source file so he can adjust it to the shape of the boat.

[Brushless55]

hey CornelP
I have a Yellow Rio 51z that I would love to add some color to.
any great ideas you have for that hull?
thanks

[CornelP]

Barbie or Hanna Montana? ;P
I'll take a look and see...

[Brushless55]

Barbie or Hanna Montana? ;P
I'll take a look and see...

:w00t:

[tomstoys2]

:rofl:
Sorry, I might have corrupted this thread.

Cornel, Nicole flipped out over the design. She said "you are really nice". I'll let you know exactly what ones to send Jeff.

Thanks,
Tom

[CornelP]

You're welcome! Glad she liked it... after doing quite some graphics for my daughter, I got a bit of experience. Luckily she grew up now and has other interests... Facebook, boys....

[tomstoys2]

Hi Cornel,
When you get a moment can you send Jeff and myself these files along with one of just Polly on the rocket for the bow. I like the idea of doing the sides in the wrap and a few decals on the bow and stern.
I am sending you a PM with my email.
Thanks,
Tom

[westbeach]

Cornel,

Could you resize this logo for me please. I wish to do this on a water slide decals, and print on my mac. Can you please help me?? http://www.ahfmr.ab.ca/albertalogo/AB%20Logo%20blue%20CMYK%20-%20tagline.eps

Cheers,

Neal

[monojeff]

Cornel,

Could you resize this logo for me please. I wish to do this on a water slide decals, and print on my mac. Can you please help me?? http://www.ahfmr.ab.ca/albertalogo/AB%20Logo%20blue%20CMYK%20-%20tagline.eps

Cheers,

Neal

What size do you need it?
I can resize it for you what dimensions do you want it to fit in?

[westbeach]

Thanks Jeff,

Could you please resize it to 8" wide by 4" high please. All I want is the Alberta logo without the extra wording at the bottom. Cheers,

Neal



What size do you need it?
I can resize it for you what dimensions do you want it to fit in?

[monojeff]

Here you go its comes out to be 8"x2.5".

[westbeach]

Perfect, Thank You Sir!! :tiphat:


Here you go its comes out to be 8"x2.5".

[monojeff]

Perfect, Thank You Sir!! :tiphat:

No problem glad to help. :thumbup1:

[maverick pro]

u-10 smokin joes?

thanks...mike

[monojeff]

u-10 smokin joes?

thanks...mike

Sent you a PM

[tomstoys2]

You're welcome! Glad she liked it... after doing quite some graphics for my daughter, I got a bit of experience. Luckily she grew up now and has other interests... Facebook, boys....

Hey Cornel,
Finally found the time and good weather to finish up the paint for the Polly Rocket. It turned out better than we had hoped for. Thanks again for turning my daughters idea into reality. You and Jeff did an amazing job.

Tom and Nicole

[CornelP]

That smile says it all.... Happy to help you get such a smile :p

[monojeff]

Was a pleasure as always to work with cornel.
You said it nothing beats a great smile.
Hope it brings lots of fun times for you and your daughter!

[Gilbequick]

That Polly Pocket is awesome! Man my daughter would flip out if she had a boat like that.

[RandyatBBY]

I am getting ready to build the "Close Call" unlimited hydroplane do you have the graphics? I have one picture and that is all I need to look for more. My new Sport Hydro the 30 inch is the subject. I have been working on the molds all summer and if they fit I will have a boat to paint. Hope you can help.

[CornelP]

I can certainly try... based on the pictures I found, the base coat is easy to do with paint, the lettering is straightforward... but the logo is the hard one. If can find a good reference image of it, I can redo it in Corel.
Still searching, I'll let you know.

[RandyatBBY]

I can certainly try... based on the pictures I found, the base coat is easy to do with paint, the lettering is straightforward... but the logo is the hard one. If can find a good reference image of it, I can redo it in Corel.
Still searching, I'll let you know.

Thanks for getting back to me so fast. I will be able to lay out the paint scheme I just need help with the graphics.

[CornelP]

Ok, this is as far as I could get tonight... still the "PHONE CARD" text to do and the U-10. Once ready, if it's ok for you, I'll post the corel file for you to resize and put the correct colors, maybe you have a better reference.

[RandyatBBY]

You are the man! Yes the corel file will be great. I really have a hard time doing much more than opening a file and using my lettering program in corel. I will be able to down load and print to scan. I will have to cut colors in Photo shop to build the vector art unless you have a eazy way.

Thank you so much I have wanted to do this boat for a long time it will be a show piece for the new 30 in sport hydro I am building. It is still ni the mold (I layed it up tuesday) so it will be a while before I get to the graphics.

[RandyatBBY]

Well I am getting closer to the paint work. boat today
http://img194.imageshack.us/img194/7065/0015at.jpg (http://imageshack.us/photo/my-images/194/0015at.jpg/)

Uploaded with ImageShack.us (http://imageshack.us)

[Diegoboy]

Would you please work your digital magic on this logo for my Hydrofoil?

Maybe have the waterline in a blue instead??

61628

[Diegoboy]

I know the quality is lacking, but it's the only copy I have

and if it's not asking too much...

61689

[CornelP]

Not difficult to do, either of them. I am out of town, so I can only get to my pc on friday...

[CornelP]

Sorry for the delay guys... slowly getting back on track.

This is the Close Call file, Corel Draw 13, all curves, so it can be re sized at will. Had to zip it, but it's virus scanned!

Logos coming in the next hour or so...

[CornelP]

Hydrofoil logo, jpeg and Corel13 (closed curves, can also be cut).

[CornelP]

And the "Wasserpolizei" done. This has been a nightmare... my eyes still hurt. But a pleasure to help :biggrin:

Any other file formats, let me know.

[CornelP]

Sorry, one rogue line removed...

[Diegoboy]

Thank you so much Cornel!!

[monojeff]

Nice work Cornel,
I think there is another "rogue" line at at about 10 oclock??
I know that took some patience to make that all work!!

[CornelP]

Did not see that one... thank you, Jeff. Corrected now :tongue:

[RandyatBBY]

Sorry for the delay guys... slowly getting back on track.

This is the Close Call file, Corel Draw 13, all curves, so it can be re sized at will. Had to zip it, but it's virus scanned!

Logos coming in the next hour or so...

Well I have Corel 7 on a old computer that I can not get the OSE site to come up on. can you snail mail a copy?

[CornelP]

Just sent you a copy of the Corel7 file on your .aol email. Any other options you can reply on that.

[RandyatBBY]

You are way too cool!Thanks!

[Alfa Spirit]

Hello Cornel, I hope that you can help me that should be great. Thank you



62243 62242 62244

[monojeff]

Hello Cornel, I hope that you can help me that should be great. Thank you



62243 62242 62244

Not sure what you want to do with these but I already have all these in digital format......
Well not all of what you posted but the graphics on the full size boat I do have...

[Alfa Spirit]

Ok Jeff, I want the big Hydrolift logo 6cm large, 2 x Hydrolift powerboats 20cm long with red into the letters. and 3 numbers "88" left + right + up 5cm large.
Let me know if this is possible, thank you very much


62245 62246 62247 62248

[monojeff]

Ok Jeff, I want the big Hydrolift logo 6cm large, 2 x Hydrolift powerboats 20cm long with red into the letters. and 3 numbers "88" left + right + up 5cm large.
Let me know if this is possible, thank you very much


62245 62246 62247 62248

Yes I can work this up for you.
Confused me on the numbers though you want them all to be the same size at 5cm tall I am assuming??

[RandyatBBY]

Ok, this is as far as I could get tonight... still the "PHONE CARD" text to do and the U-10. Once ready, if it's ok for you, I'll post the corel file for you to resize and put the correct colors, maybe you have a better reference.

CornelP would you have a way of printing the graphics, Or should I ask Jeff?

It is just a little complicated to cut as small as I need.

[monojeff]

CornelP would you have a way of printing the graphics, Or should I ask Jeff?

It is just a little complicated to cut as small as I need.

I believe somewhere in this thread Cornel had said he could do stuff but the shipping costs for him would make things to expensive to deal with.

[CornelP]

Jeff is right, it's a lot better to ask him. Just a letter size package from me to you is over 15$... plus materials...

[RandyatBBY]

OK I just wanted to check with you first you were so gracious to supply the art work. Thanks for your help I can do the lettering what you gave us will help a lot. With the little logo I am having problems with pulling the fine lines.

Jeff let me know what I need to do to get three of the logos from you. They need to be in the correct sizes for a 30 inch boat. I think threy are the ones for the sides of the cowl and the top of the wing.

[monojeff]

I'll take a look at things this coming week and be in touch.

[Scamp73]

Hey bud, I was wondering if you could do some graphics for me? I need the Eagle from the BADASS beer label sized to about 5 3/4 inches from wingtip to wingtip and with the black back ground gone for the bow of the boat. I also need the letters from the label done at about 1 1/4 inch in height. The label says BADASS, I would love to see how BADASSracing would look? Or if you have any other ideas... Again, I need the black back ground gone. Can you help me out?

Thanks
Dan


67325

67326

[RandyatBBY]

Jeff you may have forgot about me durring the holidays I am getting ready to paint the boat. Jeff let me know what I need to do to get three of the logos from you. They need to be in the correct sizes for a 30 inch boat. I they are the ones for the sides of the cowl and the top of the wing.

[RandyatBBY]

Hey bud, I was wondering if you could do some graphics for me? I need the Eagle from the BADASS beer label sized to about 5 3/4 inches from wingtip to wingtip and with the black back ground gone for the bow of the boat. I also need the letters from the label done at about 1 1/4 inch in height. The label says BADASS, I would love to see how BADASSracing would look? Or if you have any other ideas... Again, I need the black back ground gone. Can you help me out?

Thanks
Dan


67325

67326

That is a cool eagle. is it a real beer company logo?

[CornelP]

I'll try to do it... if it's for cutting, it will take some time. Just for printing on decal, it's much easier.

@Randy: yes, real one, owned by Kid Rock...

[Scamp73]

I'll take what ever you can do for me. Much appreciated...... Dan

[Scamp73]

Do you have any idea on a time frame for my stuff?

[monojeff]

Jeff you may have forgot about me durring the holidays I am getting ready to paint the boat. Jeff let me know what I need to do to get three of the logos from you. They need to be in the correct sizes for a 30 inch boat. I they are the ones for the sides of the cowl and the top of the wing.

Hey Randy I did not forget about you just had some issues at start of the year that have been taking up all my time past few weeks.
I apologize I have not gotten back to you and will be sure to get things going this week for you.
if you do not hear from my in next few days please give me a shout and remind me again.
So I know I am assuming they are not at correct size at moment so what is the correct sizes?

[CornelP]

Just came back from a business trip... will start on it today.

[Scamp73]

Thanks so much!!!!

[RandyatBBY]

Hey Randy I did not forget about you just had some issues at start of the year that have been taking up all my time past few weeks.
I apologize I have not gotten back to you and will be sure to get things going this week for you.
if you do not hear from my in next few days please give me a shout and remind me again.
So I know I am assuming they are not at correct size at moment so what is the correct sizes?

Thanks Jeff I totally understand about being tied up in a job and not able to do any thing else. Not sure on the size, the boat is 30 inches long. I might need to buy a Newton Sheet #1 - Paint Scheme sorta expensive , so if you could just get close to the right size. I think to make sure all the colors match I will need all the graphics.
676626766367664

[CornelP]

Ok, here are a couple of tests to start discussing...

[Scamp73]

Are we able to get rid of the black back ground on the BADASS Racing? Also, can you try that with all capitals to see how it looks? Or smaller letters on Racing? Another idea would be "1-BADASS" or maybe a small Miss in front of BADASS. Any ideas?

The Eagles look great, I can work with them.

Your the man!!!!!

[CornelP]

For the text, we can do anything we want... I have the original font :p
Will post some tests later.

[CornelP]

test 2

[Scamp73]

Ok, I really like #3 & #6.
#3 Is it possible to make the letters inside of Badass Racing silver?
#6 Can you try that one with silver letters also?
#6 Can you try "Miss" with red letters inside and "BADASS" with silver? Also, I would like to see one with "Miss" the same size font as you have "Racing" in #3

They look awesome!!!!!

[CornelP]

test 3

[Scamp73]

Perfect, I like both #3 and #6. Can you finalize those 2 and I was make my final descision on the boat?

[CornelP]

These are the two versions, to be chosen for best contrast on boat color...

I have the files in corel draw, send me a PM with your email and I can send them over.
When I get home, I could try to simulate shiny silver, in photoshop, but for a decent effect you would need either to print on silver decal or use a printer that does silver...

Cornel

[Scamp73]

Your the best!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Thanks so much..... Dan

[monojeff]

Thanks Jeff I totally understand about being tied up in a job and not able to do any thing else. Not sure on the size, the boat is 30 inches long. I might need to buy a Newton Sheet #1 - Paint Scheme sorta expensive , so if you could just get close to the right size. I think to make sure all the colors match I will need all the graphics.
676626766367664

Hey Randy I will PM you tomorrow on this and we can discuss options on things in more detail without cluttering up the thread.
Appreciate it!
TTYS

[tjcast]

Hi there. I'm new here but I just absolutely LOVE those BadAss Beer ones. I am from Michigan and a big Kid Rock fan so I would like to know how I can get some of those. I would like to get both the full 'label' and the modified Eagle ones. Around 2-21/4 inches tall and 41/2 to 5 inches wide. Thanks

[Scamp73]

We may have to start a "BADASSracing" team... I'll send you my graphics for some Beer? LOL. Just kiddin, I can forward you my graphics but they would not be to your size if Cornel is too busy. A sign shop can resize them for you though. Where are you at in Michigan?

[tjcast]

I'm in Sterling Heights which is north of Detroit. I'm not a beer drinker but I've been told that it's not that good. I have no problem sending you some if you want.

[Scamp73]

Ha, I live in Charlotte, NC but grew up in Livonia, MI so now you know my connection with this. I had family come down for Christmas with a couple of cases of the beer which started me on this path for my boat. BTW, I thought it was pretty good beer. If you PM me your e-mail I will be happy to send you the graphics that Cornel sent me. I was just kidding about you sending me the beer...

[Alfa Spirit]

Hi, who have the OUTERLIMITS font? I search but don' t find

Here is an OUTERLIMITS logo, I tried to have a white background, if a pro can do it that' s fine

[tjcast]

No hardware but the graphics are just about done. Thanks Cornel the Eagle looks great.686976869868699

[Scamp73]

Looks awesome tjcast.....

[Alfa Spirit]

Hi Cornel, I want to make stickers, same logo than OUTERLIMITS offshore boats. I didn' t find a better original.
Could you make Corel vectoring with this.jp? Attached file is 200% of the final print

[CornelP]

Will try to do something today...

[CornelP]

This should do nicely... I also have the corel draw file, pm me for an email address so I can send it if you need it.

[Alfa Spirit]

OMG !!! This is better than perfect. Incredible, original file was very bad
Thank you so much I worked to have left and right sides symetric

http://img408.imageshack.us/img408/6950/temp168.jpg

[Scamp73]

Finally got mine done. Thanks for the help on this CornelP

[CornelP]

Glad I could help you!

[Alfa Spirit]

Hi, I don't know if you reply to PM because the box was full
May be you can help me with this file, I want to print this OUTERLIMITS logo. Thank you for your help my friend

http://img29.imageshack.us/img29/9568/temp169.jpg

[CornelP]

I'll give it a try...

[hazegry]

thanks for the logo CornelP
http://img.photobucket.com/albums/v220/hazegry/Untitled-2.jpg

[CornelP]

Hope this brings you luck (read: customers)....

[ray schrauwen]

bump

[ray schrauwen]

Well guys, having received a number of requests for various graphics, I can actually help with the graphics only, as the vinyl stickers will be to impractical to send from here...
Of course I keep my principle of helping out, so there will be no charge. Just give me the target graphic and size, I'll do Corel vectoring, ready for the cutter or printer (for water decals).

Cornel

If you could provide me with a PDF of the new PB Blackjack decal file I'd swing you a few bucks. That way, I don;t have to wait until August for the decals to come on sale.

Really what I would like is a fine outline of the words "BLACKJACK" as seen on the hull side so I can print onto stickey Velum paper for a paint stencil, after I cut out the letter with an exacto blade.

What do you think Cornel?

Thanks!

[CornelP]

I'll see what I can do... :p

[ray schrauwen]

Awesome, thnks!

[Alfa Spirit]

http://img534.imageshack.us/img534/3948/racemasterprint784.jpg

http://img37.imageshack.us/img37/1853/racemasterprint585.jpg

http://img27.imageshack.us/img27/3847/ztuning590.jpg

[KartRacer]

Cornel
Can you do graphics of trademark images to fit hulls?

[KartRacer]

Cornel
I would like to do a graphic for my 35" DF Pirate.
"Miss Almond Joy" with the almond joy logo from the wrapper. Probably seems odd but we used to do these things with our airplanes and they turn out pretty cool.
Let me know if you can help, I have some graphics downloaded from the web and there is plenty of time as I am just getting project started.
Thanks in advance,

[KartRacer]

Cornel
I would like to do a graphic for my 35" DF Pirate.
"Miss Almond Joy" with the almond joy logo from the wrapper. Probably seems odd but we used to do these things with our airplanes and they turn out pretty cool.
Let me know if you can help, I have some graphics downloaded from the web and there is plenty of time as I am just getting project started.
Thanks in advance,

[RandyatBBY]

Cornel Hi

I am thinking about painting my HPR the Segad design do you have any of the graphics you could share, I need outline only for a vinyl cut. 88301

Thanks in advance