Matt C
02-05-2010, 08:15 AM
Hi all, after reading and looking at various threads on here im curious as to whether my setup, twp lengthy propshafts. is ok?
I notice that quite a few members run stingers, and flexishaft to a motor mounted towards the rear of the hull. With my setup the motors sit nearer the mid point of the hull, and are coupled to the propshaft using a shorter flex cable.
So my question is, will this hinder performance and is it worth going the stinger route before i start the rdbuild? Also its a twin cat so fitting the motors in parrallel to the drives etc is easy enough.
I notice that quite a few members run stingers, and flexishaft to a motor mounted towards the rear of the hull. With my setup the motors sit nearer the mid point of the hull, and are coupled to the propshaft using a shorter flex cable.
So my question is, will this hinder performance and is it worth going the stinger route before i start the rdbuild? Also its a twin cat so fitting the motors in parrallel to the drives etc is easy enough.