View Full Version : P spec/limited rigger
Jeepers
01-24-2010, 09:27 PM
a short video of my P-Spec/P-Limited outrigger, set up is 4s Hyperion G3 4200mah SV27 motor, hydra 120 and a m645 prop, This is the maiden voyage on ROUGH water with 20-30 mph winds.
http://www.youtube.com/watch?v=cneLpziYlKw
Looks nice. I love conditions like that, makes things more interesting.
Xcesive8
01-28-2010, 07:01 PM
Yeah hows that chop!
Handles it very well:rockon2:
Jeepers
01-30-2010, 01:20 AM
thanks guys!
raptor347
01-30-2010, 02:02 AM
Looks good. Wait til you get to play with it in good conditions.
Jeepers
01-30-2010, 03:07 AM
Looks good. Wait til you get to play with it in good conditions.
Thanks! I can't wait either!:rockon2:
longballlumber
01-30-2010, 09:02 AM
Looks good Sean,
Do you have any idea what kinda speeds your getting? How does it turn at full throttle?
Later,
Mike
Jeepers
01-30-2010, 11:04 AM
Mike so far it turns great, speeds are a guess right now, comparing to my other hydros, I wanna say mid 50s, I was afraid to test harder cause the rear skis are taped on, until I get her tuned!
properchopper
01-30-2010, 12:00 PM
Nice job ! It never fails to impress me how them spindly little boatie-thangs called riggers can blast through the chop ! Many of my actual boat-looking rigs wouldn't do as well in that stuff. Keep up the good work :Peace_Sign:
Jeepers
01-30-2010, 11:01 PM
Nice job ! It never fails to impress me how them spindly little boatie-thangs called riggers can blast through the chop ! Many of my actual boat-looking rigs wouldn't do as well in that stuff. Keep up the good work :Peace_Sign:
Thank you sir! you wanna know what surprises me?
the motor with a cooling jacket weighs more than the bare hull!!
Ub Hauled
01-30-2010, 11:51 PM
that rigger is pretty impressive, that is pretty good chop and the wind are gale force proportionally... sweet.
Rumdog
01-31-2010, 01:31 AM
Crap! Is that a raptor rigger? Blastin through the rough stuff bro! Good stuff!
longballlumber
01-31-2010, 09:00 AM
the rear skis are taped on, until I get her tuned!
As long as your using a GOOD double sided tape they will stay on. We have been taping the rears on 60+ mph nitro riggers for years. I wouldn't advise gluing them to the hull. Makes it MUCH easier if you need to do a repair. Another note about taping... If you need to remove them while they are taped on use some dental floss to separate the rear sponsons from the tub.
I am really glad you got this boat running. It was only collecting dust in my basement before you bought it. :rockon2:
Later
Mike
Jeepers
01-31-2010, 12:37 PM
Crap! Is that a raptor rigger? Blastin through the rough stuff bro! Good stuff!
nope its not a Raptor. I want one now!
you will have to ask longballlumber I got it from him, and I dont remember the name.
Jeepers
01-31-2010, 12:46 PM
As long as your using a GOOD double sided tape they will stay on. We have been taping the rears on 60+ mph nitro riggers for years. I wouldn't advise gluing them to the hull. Makes it MUCH easier if you need to do a repair. Another note about taping... If you need to remove them while they are taped on use some dental floss to separate the rear sponsons from the tub.
I am really glad you got this boat running. It was only collecting dust in my basement before you bought it. :rockon2:
Later
Mike
Thanks Mike! good to know about the tape!
Ub Hauled
01-31-2010, 04:07 PM
As long as your using a GOOD double sided tape they will stay on. We have been taping the rears on 60+ mph nitro riggers for years. I wouldn't advise gluing them to the hull. Makes it MUCH easier if you need to do a repair. Another note about taping... If you need to remove them while they are taped on use some dental floss to separate the rear sponsons from the tub.
I am really glad you got this boat running. It was only collecting dust in my basement before you bought it. :rockon2:
Later
Mike
I have seen sponson wedges on 100mph+ rigger attached with tape... interesting thrill.. hehehehehe
Jeepers
02-04-2010, 11:41 PM
I have seen sponson wedges on 100mph+ rigger attached with tape... interesting thrill.. hehehehehe
thats scary! riggers are cool but they make me nervous, like if I sneeze on it its gonna break!
Doug Smock
02-05-2010, 12:16 AM
A rigger on rollers!!! lol Nice work sir!!
Doug
Jeepers
02-05-2010, 01:13 AM
Thank you sir!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.