PDA

View Full Version : aquacraft hammer



Constrictor007
01-19-2010, 01:52 PM
What's a good metal prop for a Hammer? I destroyed the stock one.

Chilli
01-19-2010, 03:40 PM
I have no idea, but I cleaned out the shop last week and have a spare rudder and prop I'll send you free if you PM me your address.

Rex R
01-21-2010, 03:53 AM
octura x632 comes fairly close to the stock prop

Chilli
01-21-2010, 05:08 PM
Stuff is in the mail Gregory. I started out with a Hammer for my son three years ago. It's gone now, but we're currently up to 4 FE boats's and a gas boat.

Be afraid. Be very, very afraid.:eek:

Constrictor007
01-24-2010, 01:08 PM
I really appreciate it Nauti, hopefully I can return the favor someday. Thanks Rex, when I upgrade it to brushless, I'm def going with a metal prop. BTW I got my Hydromite and I've tested it with a 2s lipo and trying one of my 3s 3000mah on Wed. My wife (who has no interest at all in my RC's) actually really likes this one. I shot a vid of it and here's a link http://www.youtube.com/watch?v=CUOEGH94tYs

Rex R
01-24-2010, 09:11 PM
methinks I'll do some more testing this coming year with my brushless hammah (feigao 540l 7t)...you may want to upgrade the stock shaft to something less likely to bend at the motor end(mine was factory bent) replaced mine with an 1/8" shaft(also replaced the tube bushings).
rex

Constrictor007
01-25-2010, 04:38 PM
Nauti I got the prop and rudder, now I'm back in business. I really appreciate it

Chilli
01-25-2010, 06:38 PM
No problem Bro.:thumbup1: