View Full Version : This brushed esc?
Brushless55
01-18-2010, 02:05 PM
Looking for help..
I'm looking to replace the esc in my Rio ep using the stock 550 can..
I found this little esc that can run 2s and 3s and it's only 8 bucks!
do you all think it would work just fine?
http://www.hobbycity.com/hobbycity/store/uh_viewItem.asp?idProduct=6468
screwball
01-18-2010, 02:08 PM
ive been contemplating buying a couple of those for some time now and on my next order i am, so i can get my reef racer running again.... with 3s lipo muahahahaha lmao
Brushless55
01-18-2010, 02:10 PM
Sweet!
I'm thinking 30A is more than enough?
defsaturn6501
01-18-2010, 02:14 PM
this should handle a 27t stock motor on 6 cells without thermaling? ya think?
Karfrik
01-18-2010, 02:22 PM
This sounds great and cheap at the same time!!:thumbup1:.So can it be used then? what size and capacity 2S or 3S are we talking here?.........I`m on this too!!
TRUCKPULL
01-18-2010, 03:04 PM
Will it work with a Pistol radio??
or is it for Stick radio's only?? you can get an adapter for this.
Larry
Brushless55
01-18-2010, 04:07 PM
Will it work with a Pistol radio??
or is it for Stick radio's only?? you can get an adapter for this.
Larry
That's a good question I did not think of..
westbeach
01-18-2010, 04:34 PM
I have a couple of those brushed esc, I think you need the pistik in order for it to work. I bought it for my sons Villian, but then realized. I will sell these, as I don't need them anymore. Brand new.
screwball
01-18-2010, 04:41 PM
ill take one or two!!!!
how many do you have?
BILL OXIDEAN
01-19-2010, 10:13 AM
The 30 amp version will work but its definitely not more than enough.
I'm glad there are brushed escs still available for guys
Karfrik
01-19-2010, 10:45 AM
so finally,do we need a "PISTIX" in order to make it work on our Pistol radios?......have anyone verified this for sure?......thanks guys,....Al
BILL OXIDEAN
01-19-2010, 10:57 AM
I doubt a pistix will be needed since the esc has brakes it was designed for surface use. Pistix are to convert plane controllers
Karfrik
01-19-2010, 11:11 AM
You must be right!!! it has brakes!!!,...thanks
Brushless55
01-19-2010, 11:13 AM
looks like I may get one then..
Karfrik
01-19-2010, 11:17 AM
for the cost of shipping do yourself a favor and get 2!!!!......thats what i`ll be doing,..........Al
westbeach
01-19-2010, 12:12 PM
I have 2, 30A versions. They are yours. PM sent
ill take one or two!!!!
how many do you have?
Karfrik
01-19-2010, 02:35 PM
I wanna be behind Screwball if he doesn`t take the 2 of them.Please let me know what you guys do!!....thanks,...Albert/karfrik
Brushless55
01-19-2010, 03:48 PM
for the cost of shipping do yourself a favor and get 2!!!!......thats what i`ll be doing,..........Al
shipping is only 4bucks for two
Karfrik
01-19-2010, 11:10 PM
Sweet!! .......................:thumbup1:
westbeach
01-20-2010, 10:53 AM
Albert,
I have not heard back from Brushless, so the esc is your's if you're still interested? lmk
I wanna be behind Screwball if he doesn`t take the 2 of them.Please let me know what you guys do!!....thanks,...Albert/karfrik
Karfrik
01-20-2010, 01:48 PM
sending pm.......thanks!!!
Brushless55
01-20-2010, 02:53 PM
Albert,
I have not heard back from Brushless, so the esc is your's if you're still interested? lmk
I did not know you were talking to me... :huh:
westbeach
01-20-2010, 04:14 PM
I was replying to you in this thread, as you had sent me a pm in regards to the esc. Is your mailbox full?
I did not know you were talking to me... :huh:
westbeach
01-20-2010, 04:17 PM
See post #16 ,then #17 as this is what Albert replied to my entry! :confused2:
I wanna be behind Screwball if he doesn`t take the 2 of them.Please let me know what you guys do!!....thanks,...Albert/karfrik
screwball
01-20-2010, 04:39 PM
sorry i have been away from my pc please give them to whoever wants them my last funds had to go to something else.....
Brushless55
01-20-2010, 05:33 PM
See post #16 ,then #17 as this is what Albert replied to my entry! :confused2:
post #16 was not to me....
either was #17
westbeach
01-21-2010, 03:24 AM
Screwball and Brushless,
My apologies guys, I just went back to read the post and the pm's. Basically Screwball was first, but I screwed up and offered to Brushless instead. Brushless had nothing to do with it but a mere innocent bystander. Screwball, I am offering them to you since I messed up. Please let me know if you would like them. PM sent! Thanks
Albert, please stand by!
Karfrik
01-21-2010, 10:07 AM
Screwball,yes we noticed the mistake/confusion so they are still yours if you want them.Or we can split if you want too.Let us know what you want to finally do....Albert/karfrik
screwball
01-21-2010, 11:08 AM
sell them to whoever westbeach i sent you a pm.. the project i was working on fell through and i had to use the funds for something else...
tomstoys2
01-21-2010, 11:40 AM
Do you think this ESC would work on a Associated Reedy Flash Point Modified 15 Turn Double Wind Motor using 2s Lipo? Running it in my TC3 onroad cars.
westbeach
01-21-2010, 02:13 PM
Albert, Thanks for your patience. Both esc are yours. PM sent.
Thanks
Neal
Brushless55
01-21-2010, 03:35 PM
Screwball and Brushless,
My apologies guys, I just went back to read the post and the pm's. Basically Screwball was first, but I screwed up and offered to Brushless instead. Brushless had nothing to do with it but a mere innocent bystander. Screwball, I am offering them to you since I messed up. Please let me know if you would like them. PM sent! Thanks
Albert, please stand by!
That's what I was trying to tell ya
you quoted screwball
and I ordered two from HC last night with a few other things I need.. :thumbup1:
Karfrik
01-22-2010, 02:12 AM
No problem Neal,money sent through Paypal already....check PM for my address,......thanks,....Albert
westbeach
01-22-2010, 03:47 PM
Got it Albert, Thanks. Will mail the stuff out on the w/e!
Neal
No problem Neal,money sent through Paypal already....check PM for my address,......thanks,....Albert
Karfrik
01-23-2010, 03:14 AM
No problem,................Albert
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.