PDA

View Full Version : WTB brushed ESC



TRUCKPULL
01-03-2010, 01:39 AM
I am looking for a brushed ESC that can handle two 550 brushed motors.

It is for a neighborhood kid with a Clod Buster.

I was thinking about a Astro ESC.

Larry

johnnyoverkill
01-03-2010, 11:22 AM
Larry,

I'll do some digging. I think that I still have a new 212D in the shop.

I'll let you know,
John

properchopper
01-03-2010, 11:35 AM
I was just going to post this. $ 30 shipped USPS. If it doesn't work out with John, let me know-B back later- [ Astro 212D-25 volts max 75 amps]

Tony

johnnyoverkill
01-03-2010, 10:36 PM
Thanks for posting too Tony. We all have enough of the older stuff left laying around!

Larry,
Not only did I find the new 212D, I found 2 used ones (212Ds), and 3 207Ds. There was even a Tekin 432M in there, and I even dug up 2 brand new SS1s still in the tubes! Man, I should dig out the old boxes more often! NA! :just-kidding:

Let me know if you are interested in an ESC and I'll post or PM pics, I'll follow Tony's lead at $30.

FYI; I had seen your post earlier on the red site where you had already found one. Let us know if it falls through.

John

westbeach
01-03-2010, 10:51 PM
Johnny,

What condition is that Tekin 432M esc? If I am correct that esc will power two motor and handle 2 batt's right? I am looking for a Tekin marine esc for my kids Villian.


Thanks for posting too Tony. We all have enough of the older stuff left laying around!

Larry,
Not only did I find the new 212D, I found 2 used ones (212Ds), and 3 207Ds. There was even a Tekin 432M in there, and I even dug up 2 brand new SS1s still in the tubes! Man, I should dig out the old boxes more often! NA! :just-kidding:

Let me know if you are interested in an ESC and I'll post or PM pics, I'll follow Tony's lead at $30.

FYI; I had seen your post earlier on the red site where you had already found one. Let us know if it falls through.

John

TRUCKPULL
01-04-2010, 01:28 AM
I found a ESC.

the 432M will run two motors.
ONE battery input NOT two.

I have a Manual (432M) in PDF format if you need one.

Larry

westbeach
01-04-2010, 08:52 AM
Thanks Larry, I need to find a esc (tekin 432M) first or similar to handle 2 motors. Will the Astro handle 2 motors like the Tekin?


I found a ESC.

the 432M will run two motors.
ONE battery input NOT two.

I have a Manual (432M) in PDF format if you need one.

Larry

TRUCKPULL
01-04-2010, 10:58 AM
The Astro and the R/C Hydro's will handle 2 motors.

There advantage over the older 432m is that the 432m
has manual adjustments on the controller that can drift
out of adjustment.

Larry

westbeach
01-04-2010, 07:30 PM
Hi Tony,

Is the Astro esc still available? I could use it on my kids Villian. LMK Thanks

Neal


I was just going to post this. $ 30 shipped USPS. If it doesn't work out with John, let me know-B back later- [ Astro 212D-25 volts max 75 amps]

Tony

properchopper
01-04-2010, 07:52 PM
Hi Tony,

Is the Astro esc still available? I could use it on my kids Villian. LMK Thanks

Neal

I'd like to bench-test it first; haven't used it in a long while-will do in the morning.
BTW, is BC Baja California or British Colombia ?

westbeach
01-04-2010, 08:02 PM
Thanks Tony, BTW it is British Columbia, Canada. Baja Cali would be nice, never been there.

properchopper
01-05-2010, 12:02 PM
Hi Tony,

Is the Astro esc still available? I could use it on my kids Villian. LMK Thanks

Neal

Neal, the 212D tested out fine. I'll include a series harness with deans for the batteries. You'll have to wire the motors to the output side & install some shrink over the SC. BTW this is the SC I used to set the 2006 NAMBA LSO record. PM me with your addy. I'll take paypal or check in the mail.

Tony

http://www.youtube.com/watch?v=u6ZIi2X1eHU

AndyKunz
01-05-2010, 01:02 PM
Larry,

I still have almost a dozen NIB V90-1032/Opto controls around here.

Andy

westbeach
01-05-2010, 11:28 PM
Thanks Tony, paypal sent. Appreciate your help.

Neal


Neal, the 212D tested out fine. I'll include a series harness with deans for the batteries. You'll have to wire the motors to the output side & install some shrink over the SC. BTW this is the SC I used to set the 2006 NAMBA LSO record. PM me with your addy. I'll take paypal or check in the mail.

Tony

http://www.youtube.com/watch?v=u6ZIi2X1eHU