View Full Version : Apache question
illz302
10-22-2009, 11:43 AM
Ok this is a dumb question I know but what size is the prop shaft on this apache and will either one of these work on it?
http://www.offshoreelectrics.com/proddetail.php?prod=octsb-x437/3
http://www.offshoreelectrics.com/proddetail.php?prod=octsb-m435/3
SweetZ28
10-22-2009, 11:47 AM
Hi i don't think they will work i think the stock set up was a 4mm or 3mm shaft.
illz302
10-22-2009, 01:08 PM
what parts can i use to replace the shaft and prop with one of those? BTW what 540 brushed motor would be faster than the stock one?
SweetZ28
10-22-2009, 01:38 PM
Hi e-mail Steve the owner of offshoreelectrics.com i think he has a brass tube you put over the existing shaft so you can fit the 3/16 size props.
illz302
10-22-2009, 08:49 PM
Hi e-mail Steve the owner of offshoreelectrics.com i think he has a brass tube you put over the existing shaft so you can fit the 3/16 size props.
Oh that is great info thanks sweetz28. Im emailing him as I type you!
illz302
10-27-2009, 01:17 AM
OK update I tried to use a brass prop I got for my blast and it fit on the apache's prop shaft it was just too small of a diameter and since it came with a shaft kit Im wondering if it will fit on the stock setup.
domwilson
10-27-2009, 01:36 AM
You might find this useful.. http://www.offshoreelectrics.com/info-pages/fit-propellers.php
illz302
10-27-2009, 11:41 AM
thanks that was def usefull
SweetZ28
10-27-2009, 12:18 PM
You might find this useful.. http://www.offshoreelectrics.com/info-pages/fit-propellers.php
:beerchug:Thanks
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.