PDA

View Full Version : Venom King of Shaves P1 35in Brushless Boat Q & A



  1. New video of the P-1 !!
  2. King os shaves p1
  3. P-1 mono motr upgrades
  4. Venom 2700kv and 2000kv Marine Brushless Outrunner Motors
  5. New p-1 comes out in December??????
  6. P1 Power Plant advice
  7. Found this clip. Only 15sec.
  8. New P-1 mono in stock!!!
  9. Turn fins a good idea on the P1?
  10. New P1!!
  11. P1 Mono Impressions
  12. in stores now
  13. Vid Of P1
  14. Rudder Placement Question
  15. Esc battery connection
  16. P1 King Of Shaves Set Up
  17. torque roll issues
  18. Turn fins installed (pics)
  19. NUE Power on 4S
  20. Esc trouble.
  21. Anyone get a 40mm prop W/ theirs??
  22. Esc timing?
  23. I need a hatch!!!P1
  24. P1 Offset Rudder
  25. WTB P1 flex cable.
  26. Would this be a direct replacement motor?
  27. P1 overhaul
  28. Video/s of the P1 in action, and my first thread here.
  29. FOUNTAIN P1 powerboat stickers
  30. Look what Sears has
  31. Turnigy h3126 1600kv outrunner on 5s
  32. P1 prop talk/discussion
  33. Motor clamp
  34. p-1 hull/hatch $149
  35. new p1 owner question
  36. Venom customer service!
  37. Battery connection on myP1
  38. Venom p1
  39. My P1, im having issues..
  40. My P1 wont plane
  41. Think this could be the culprit??
  42. New Boat and Member
  43. P1 prop question
  44. P1 wave handling
  45. Shredded Flex Shaft
  46. P1 Modifications
  47. New boat...kapooof!
  48. Stripping motor coupler
  49. out runner end cap
  50. 6s power!!!
  51. Rough water Pics from the weekend!
  52. Weekend Pics
  53. what lipo packs fit
  54. Venom P1 KOS - Diesel
  55. Does anyone have a remedy for sealing the hatch?
  56. Recommendation?
  57. Converting Venom King Of Shaves P1 to nitro
  58. Running the P1 vid
  59. Kos p1 trim tabs/turn fins ?
  60. Factory ESC capabilities
  61. ready to run prop
  62. King of shaves p1
  63. P1 kos 35" offset rudder.
  64. P1 kos 35" timing
  65. Batteries either side of the motor.
  66. 3674 2200kv too much for venom p1
  67. Seem to have a lot of play in the flex.
  68. this or sv27r
  69. Bought a Ekos P1 hull
  70. Prop section for my P1
  71. P1 35" KOS Modding and testing info,With links.
  72. 4074 2000kv fitted with pics
  73. Need some help with Lipos
  74. New build - EKOS to Single...suggestions please
  75. Modding the stock out drive?
  76. Lipo clarification needed on the P1
  77. Esc blew up
  78. Motor torque
  79. Instead tutn fins?
  80. Venom KOS P1 Twin Outrunner Setup
  81. Thinking about getting a P1 hull
  82. Considering a EKOS C1
  83. My P1 35" sub floor came completely unglued from the hull.
  84. KOS P1 Twin Setup ??
  85. prop help
  86. Best FE boat for a first boat?
  87. P1 cavitation wont hook up
  88. upgraded flex shaft and collet
  89. King of Shaves rebuild
  90. Ekos issues, ? And how to upgrade motors esc mounts etc
  91. New old King of Shaves P1