Looks like we will have a big boat motor soon.

[Steven Vaccaro]

I just tested my Pulso motor. Its 6 OUNCES heavier than a feigao XL motor!
Should push a 35-40" boat with no problem. I dont have the time to water test it. The shaft is 6mm so I had to drill a airplane prop hub to test it out a bit. Went well.

[saleens7]

whats the KV of it?

will you have a mount and water cooling jacket for it?

[Steven Vaccaro]

We can order any kv, I purchase a 1100kv test sample.

[saleens7]

i remember you saying that the quantam i had wasnt a good motor, i may switch it out for this one, but what prices will i expect?

and will it fit on the existing vee stlye motor mount meant for 540 Bl motors and 700's...the one i have?

[saleens7]

oh, and will there be flex couplers meant for this size motor shaft? (preferably 6mm to 3/16")

[SJFE]

OhYeah

2 Words..YEE HAA....:D

[Steven Vaccaro]

Now that I tested the motor a bit I will start working on couplers. The mounting holes are a hair further apart than a 700 motor. It uses 4mm screws. The existing mounts can be drilled a bit to fit these motors.

[lferguson]

Steven can we order these yet. I know JD said he like his he got from that scammer on eBay. but it wasn't as big as he thought. Look plenty big to me. Do you have a motor chart on these yet?

[admin]

He got the short version. I have some on order. I should have them in 3 weeks.

[Stealth Assassin]

I just tested my Pulso motor. Its 6 OUNCES heavier than a feigao XL motor!
Should push a 35-40" boat with no problem. I dont have the time to water test it. The shaft is 6mm so I had to drill a airplane prop hub to test it out a bit. Went well.

Damn... I thought you where going to say you where carrying lehner!:rolleyes:

[admin]

Lehner? Na. I hope to have some"New" motors soon. :D

[Stealth Assassin]

Lehner! Lehner! Lehner!

[lferguson]

Steven, I just bought my first Neu today. Would have rather bought from you. Also are you going to carry the Pulso or the Feagio ESC's?

[Mich. Maniac]

I am running twin bl on 36 light boat I wanna be above 60mph and I was told 2 neu 1512 1.5d motors would do it with x447's and 14.8 lipos can anyone tell me if that is a good setup?

[Diegoboy]

Sounds good & expen$ive too!

WOW $280 each for the motors! That's more that the cost of my whole fleet!!!