aeromarine titan 29

[Jcarlton]

is anyone selling a aeromarine titan 29 boat without the electronics and esc,and motor ?
i just need a hull ready with struts , drivetrain , motor mount ect. thanx for your time!!!:D

[Doug Smock]

Yes sir, right here at OSE!! http://www.offshoreelectrics.com/products.php?cat=9
Great boat by the way.

[Jcarlton]

yeah but i was hoping someone would have one laying around they don't use anymore. got all the electronics just need a great boat hull thats prepped for me !!
that titan 29 pops !! this will be my fourth boat!! love the hobby started out in boating but have been into nitro trucks and electric trucks.

[lferguson]

The Titan was my first build and I LOVE it. The Titan was a FUN and EASY build (both times). Do your self a favor and buy one new and BUILD IT!!!! You won't regret it, I promise.

[Doug Smock]

Do your self a favor and buy one new and BUILD IT!!!! You won't regret it, I promise.

I'll second that!!!

[ReddyWatts]

same

OSE does sell the Toysport - Triton, Syncron and Jolly Cat with the hardware already installed.

http://www.offshoreelectrics.com/pro...rod=TP-Syncron

http://www.offshoreelectrics.com/pro...prod=TP-Triton

http://www.offshoreelectrics.com/pro...?prod=TP-Jolly

[SJFE]

With 4 boats..It's about time you build one on your own. I agree...go for it!!

[properchopper]

re

I'm running a Titan 29 [which I picked up used] ; it's GREAT !! With a 9XL, 12 cells, M445 it screams & corners like it's on rails. Go for it ! :)

[Doug Smock]

Titan 29

Here is mine.
I like it so much, I bought another one just in case, (for when) something happens to this one.:)

There are alot of people here who would be glad to send you some setup pics.

[Jcarlton]

its gonna cost me !!! how hard has it to install the drive hardware , motor mounts , and servo mount ? id like to have one but fine design wants 1,250 for one with the motor and esc !!dont need all that just a good plat form . might have to start from scratch with a bare hull !! i guess you guys will assist & educate me . just getting in the hobby i have a sw 26, villain ex im modding out , and a graupner b-24 ill get monday , but i want to put that brushless in a good boat!!

[lferguson]

It woll cost you but it will come out probably about the same as buying one right out. IMO, Don't buy a FDM Titan. I tell you this because my original Titan was built by my but exactly like the FDM setups. It ran well, about 28 - 31. I saw another one run that has my exact motor and it was twice the boat the FDM set up was. Look at my album on the OSE Gallery.. Better yet look here http://forums.offshoreelectrics.com/showthread.php?t=37


Post #19 and #21 That is before and after of my Titan.

The Titan was my FIRST scratch build of ANY RC anything. It's not that hard once you start.

D.Smock is right, plenty of folks here have pics of there Titan builds so you will have plenty of resources. Heck I even have pics of some guys Titan (some wierd guy ) I took w/a tape measure that shows exactly were everything should go.

[Jcarlton]

cool ill look into it !! ive got all my electronics and my brushless motor & esc . just want a damn fast boat!!!

[Doug Smock]

cool ill look into it !! ive got all my electronics and my brushless motor & esc . just want a damn fast boat!!!

There you go. What do you have for a motor and esc??

Doug

[Rex R]

most nerve wracking bit for me is drilling the hole for the stuffing tube(with bending it a close 2nd). everything else was pretty much straight forward, and if you have an example to work from...also fairly easy.

[lferguson]

I will second that.. My Titan sat on my table for a good two weeks before I did anything to it. The first thing I did was drill the hole. The vendor I bought it from said that was what I should always do first. I was soooo intimidated by drilling that hole. You only get one chance (or so I thought). That was honestly the scariest part, the rest was pure fun. Turns out I drilled the hole wrong though and I have since redone it.