Well here is a little project hot off the drafting board with some of my own changes to the original design, like widened, stringers changed out to 1/8" ply all the parts re-drawn in CAD, etc.
So the parts shown are entirely made from my scrap box that saves about 6.00 to 8.00 bucks in balsa! about 1-2 gallons in gas (in my pick up 6.0 Chevy) which now a days counts.
I started making the templates last night and cut out the pieces this morning, the boat is 16" long and 6" wide we will see what happens next!!! more pics to follow.so enjoy these!!
So the parts shown are entirely made from my scrap box that saves about 6.00 to 8.00 bucks in balsa! about 1-2 gallons in gas (in my pick up 6.0 Chevy) which now a days counts.
I started making the templates last night and cut out the pieces this morning, the boat is 16" long and 6" wide we will see what happens next!!! more pics to follow.so enjoy these!!

Comment