HyDROMITE micro hydroplane 4sale ARTR

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Avanti
    Fast Electric Addict!
    • Nov 2007
    • 1280
    #1

    HyDROMITE micro hydroplane 4sale ARTR

    SOLD
    here is the build thread.
    http://forums.offshoreelectrics.com/...ead.php?t=2240
    I have a ton of hours invested in this boat.
    It is fast and stable.
    Asking price $165 shipped all you will need is a radio and lipo charger to start racing.
    the battery has 5 charges on it and was always balanced.
    here is the required pic but check the build thread for more.
    Last edited by Avanti; 07-07-2008, 06:52 PM.
    The Manx has been sitting dormant, but I think I finally have my motivation back. I hope to see it float soon.
    Tags: None
    • obrien
      Fast Electric Addict!
      • Nov 2007
      • 1264
      #2
      mmm this is a great running little boat. Very tempting

        Comment

        • Chop
          Senior Member
          • Nov 2007
          • 504
          #3
          This looks like a sweet little boat!!!

          Your build thread shows some awesome craftsmanship - you done good.

          This comes with a (one) lipo battery that you mentioned in the thread (11.1v 1500mah 15C Li-Polymer Battery, burst 20C)?

          I really don't need this kind of temptation. It would be fun to run with my MCR Micro Hydro.

          What are the overall dimensions?
          There is a fine line between "hobby" and "mental illness."

            Comment

            • Avanti
              Fast Electric Addict!
              • Nov 2007
              • 1280
              #4
              bow to rudder 19.5"
              bow to stern 16.5"
              sponson to sponson 8.5"
              rudder length 3"
              includes the 3s lipo in the build thread
              3000kv brushless outrunner in the thread
              30amp brushless esc in the thread
              hitec micro servo
              prop

              all you will need it to install your receiver and charge the battery.
              I have 3.5mm bullets between the esc and motor and a deans connector for the battery
              the boat is water tight when the hatch is taped on
              I have added the pieces of lead in the nose so you can stand on the throttle.
              this boat will wipe the floor with a stock minicat hydro

              I don't really want to sell it, but I need cash to build the delta force 33 I got.

              I need running gear for it if you want to make a partial trade
              I am going to order the speedmaster set up off of OSE first thing Monday
              The Manx has been sitting dormant, but I think I finally have my motivation back. I hope to see it float soon.

                Comment

                • Avanti
                  Fast Electric Addict!
                  • Nov 2007
                  • 1280
                  #5
                  bump
                  The Manx has been sitting dormant, but I think I finally have my motivation back. I hope to see it float soon.

                    Comment

                    • Avanti
                      Fast Electric Addict!
                      • Nov 2007
                      • 1280
                      #6
                      partial trade to obrien Thanks bud atleast I will still get to run it this way, alot of sweat went into that little boat
                      The Manx has been sitting dormant, but I think I finally have my motivation back. I hope to see it float soon.

                        Comment

                        • obrien
                          Fast Electric Addict!
                          • Nov 2007
                          • 1264
                          #7
                          no problem. works out all the way around. now I just have to decide which motor will go in the MM

                            Comment

                            Previous template Next
                            Working...