29 Vee w/ Motor and Hardware Setup.

[Skunk Works]

Hello all,

Just built 29" vee for sale. All new parts, hull never seen the water.

Specs:

• 29" long x 9" wide at the transom
• KB36 11XL Motor w/ Alum XL cooling jacket
• Anodized blue alum strut and rudder setup
• Alum adjustable motor mount
• Octura coupling
• .150 flex, 3/16 shaft w/bullet nut
• 47mm 3-blade prop
• Hextronik metal gear servo
• Anodized blue alum antenna mount
• Anodized blue water outlet

Ready for your esc and receiver

Would appreciate $200 plus shipping. Dim weight on the box is 20 lbs. ( 39"x8"x12") Rudder blade will be removed for safe shipping (2 screws).

Pics attached. Let me know if want more pics, I can send more out to you.

Thanks!

Scott - Skunk Works -

[yz120]

scott, i should have bought this boat instead of just the hull
this is a good deal for somebody
i will let you know when mine arrives.

[Chop]

That's a good lookin boat!

[txboatpilot]

These are great Hulls, I have one in Red...Runs good and stable!!

Thanks again Scott!!!!

[yz120]

[QUOTE=txboatpilot;31558]These are great Hulls, I have one in Red...Runs good and stable!!

rich,
can you post a pic of the interior of your boat(please)
this is the hull the 9xl is going in.
thank you,
mike

[RCprince]

Thats a crisp set-up, nice work...hardware really looks good

[Skunk Works]

Mike, hoping you get your hull in the next couple days. Won't even mention the almost disaster with Rich's package to TX.....whew.

I am a big fan of this hardware setup. I am carrying this hardware in the shop (red, gold and blue) thought I would use on the cats only, but it works very well on the vee.

This will be a great runner, an SV killer.

Selling to support new product lines coming in....note my new 4WD 3300kv brushless RTR buggy on the bench.

[SJFE]

That HW does look nice. I like the fact it a single unit. Lineing it up during installation should be a snap hu.

[Skunk Works]

SJ, the install on the hardware is super slick and speedy. Sometimes I cannot stand lining up and drilling 4 holes for a strut....lack of patience.


All,

We need to help Chop find an esc for this thing.....anyone help out? Much appreciated.

Talk to you later,

Scotty

[yz120]

scott, i want it! pm sent.

[Lakefrontlivin]

If YZ120 doesn't want it let me know..
Thanx, Tom H.

[Skunk Works]

Hello All,

I do greatly appreciate the interest and support of my little hobby shop.

Boat is pending sale to Chop. Gave first interest to me on the boat purchase through an email. Its only fair.

YZ, you know I appreciate the continued support....PM coming your way....lets discuss further. Thanks for the buggy purchase also!!!

Tom. Do appreciate the interest in the boat. Please stay tuned and or lets keep in touch through PM, we may be able to work on a project.

Thanks again everyone!

Scott - Skunk Works -

[yz120]

scott, i should have bought this boat instead of just the hull
this is a good deal for somebody
i will let you know when mine arrives.

scott,hull arrived today.
guys this is a nice hull, cant wait to get her on the water.

[Skunk Works]

That is good news Mike!

Can't wait to see pics of the yellow hull build.

Thanks!

Scotty

[Skunk Works]

Payment received. Thanks Chop!! Item shipped Sat 3/22