Mhz tsunami

[DPeterson]

FOR SALE - MHZ TSUNAMI

Excellent condition. Not drilled. 32.5" long x 9.75" beam. This is the original hull that many others were copied from. This one is epoxy glass - not polyester. $150.00 delivered continental US. No PM's - post here. paypal is [email protected] Doug
000_0116.jpg

000_0117.jpg

000_0118.jpg

[rearwheelin]

I am intrested . A couple questions, transom allready installed ? Any blemishes on hull at all ? Also am not looking for a thin guage hull that would give flex when the motor torques . Looks like a great hull ! Was going to get a Titan 33 untill I seen this ! I built a titan 33 for a inlaw and it was electris layup and was super twisty were i mounted the motor so that is why i ask. I am paypal ready waiting on you !

[DPeterson]

Hi rearwheelin,

Transom doubler is not installed. The hull is in excellent shape. No blemishes.

The hull is a light layup. Most builders with most hulls will install rails that run from the transom up to the midpoint of the hull. And in some cases another fiberglass or carbon fiber cloth will be layed in the hull for strength. These building technics eliminate any twisting of the hulls. Are you familiar with these technics? I could post some pics if you would like.

Doug

[chris]

Ill take it if still available.

Chris

[JMSCARD]

Ill take it if still available.

Chris

I think its only right to give randy (rearwheelin) first crack at this as he pulled the thread back from the dead.....

[Alexgar]

get em jim

[Dangerous_Toys]

I think its only right to give randy (rearwheelin) first crack at this as he pulled the thread back from the dead.....

[rearwheelin]

Hi rearwheelin,

Transom doubler is not installed. The hull is in excellent shape. No blemishes.

The hull is a light layup. Most builders with most hulls will install rails that run from the transom up to the midpoint of the hull. And in some cases another fiberglass or carbon fiber cloth will be layed in the hull for strength. These building technics eliminate any twisting of the hulls. Are you familiar with these technics? I could post some pics if you would like.

Doug

Thanks for the response . Think I will pass and let the other fella take it. I am looking for the nitro lay up with the thicker glass. I will end up cracking somthing , I just know it...... Thanks anyway though.... Merry Christmas !

[rearwheelin]

lol..........jason

[Dangerous_Toys]

Looks like Chris is at bat!

[chris]

Doug you have PM

[DPeterson]

I had rearwheelin in line as well guy's. Thanks for digging up the post.

Looks like its yours Chris. PM was returned.

Doug

[rearwheelin]

Sure look like a great boat , really liked it and probably should have grabed it but really had my mind set on the Titan with strakes.

[LarrysDrifter]

I realize the age of this thread and that a couple pm's where exchanged, but did this sell or is it still up for sale? Let me know,as Im interested. Thanks.