Tweet
I think I've done all I want to do to this EKOS and it's time for it to go. Since the Rx is installed with silicone, I'll include a 2.4Ghz TQ Link Tx NIB and make this an RTR. Just add batteries and go.
Due to the nature of this model, I'm selling as is. I can only guarantee it ran 53mph the last time I had it out. VID LINK
The paint has chipped and come off on the top of the hull, so I slapped some decals over to help cover up where it chipped off. There's a few other chips/scratches etc.
Two 60a Venom ESC's (Hobbywing)
Two 540 sized HK 36-56 Water Cooled Inrunners (2700Kv)
Deans Connectors (ESC's wired in parallel "X" harness)
In hull water pickups w/OSE large Y splitters
OSE water inlet/outlets installed on motor mounts
Ultra-light, sharp and thin rudder for reduced drag
Bluebird BMS 660 High Speed Water Proof Servo
Traxxas 2218 LINK Rx (water proofed in silicone)
Venom 32mm Props w/Aluminum Tapered Nuts
Octura 5mm Hex Couplers
Everything listed plus the original box and manuals.
$250 Shipped USPS
International- add actual shipping.
Due to the nature of this model, I'm selling as is. I can only guarantee it ran 53mph the last time I had it out. VID LINK
The paint has chipped and come off on the top of the hull, so I slapped some decals over to help cover up where it chipped off. There's a few other chips/scratches etc.
Two 60a Venom ESC's (Hobbywing)
Two 540 sized HK 36-56 Water Cooled Inrunners (2700Kv)
Deans Connectors (ESC's wired in parallel "X" harness)
In hull water pickups w/OSE large Y splitters
OSE water inlet/outlets installed on motor mounts
Ultra-light, sharp and thin rudder for reduced drag
Bluebird BMS 660 High Speed Water Proof Servo
Traxxas 2218 LINK Rx (water proofed in silicone)
Venom 32mm Props w/Aluminum Tapered Nuts
Octura 5mm Hex Couplers
Everything listed plus the original box and manuals.
$250 Shipped USPS
International- add actual shipping.
Comment