BBY Micro Patriot action

[Basstronics]

If I can get the quirks worked out this thing will be sick!!!

Run #1 1 min 10 sec



Run #2 1 min 58 sec


Run #3 6 min 7 sec

[JimClark]

are there supposed to be videos?

[v-spec]

I really want to see this but I can't

[Basstronics]

??? Odd, maybe I didnt do the tags right or its possibly not indexed yet.

The third video is 6 mins long 260ish MB and taking some time to upload even on cable... argh...

[RandyatBBY]

Your props have too much lift along with too much RPM, you may be able to live with the RPM if you de lift the prop.

[Basstronics]

Any prop recommendations?

I currently only have a limited selection in my box. I can always buy more :)

[JimClark]

what did yo use in the videos?

[Basstronics]

BBY Micro Patriot, Mystery 26x32 3000kV outrunner, 30A Mystery ESC, XPS2 radio system, misc cheapo unmarked servo, home made hardware, Jeff Wohlt wire drive (1/8" prop shaft, .047" wire), home made motor mount/servo mount.

30mm prop- pitch is unmarked...

[JimClark]

2s or 3S

[Basstronics]

2s on these 3 vids, 1300 mah 20c

[Steven Vaccaro]

I edited your first post to include the embedded videos.

An FYI. In between the tags, you only need the text after the "=", not the whole url

[RandyatBBY]

I would run a 427 de-lifted that is with cut out as pictured. Start small with the cutouts and make them bigger until the desired ride is achieved.


Uploaded with ImageShack.us

[JimClark]

After seeing your videos I was a little worried about my micro Hydro but now I see my boat is 3 inches longer so that should be just fine. A little micro hydro rocketship

[RandyatBBY]

After seeing your videos I was a little worried about my micro Hydro but now I see my boat is 3 inches longer so that should be just fine. A little micro hydro rocketship

Have you ran your yet? I have been getting a little done on mine, I got the hull joined and the rear bracket on and a new cowl cut. Oh I also made a strut for it.

[JimClark]

No not yet I have probably an hour of work left on it to be totally done. I will get it done this weekend.

Have you ran your yet? I have been getting a little done on mine, I got the hull joined and the rear bracket on and a new cowl cut. Oh I also made a strut for it.