Just picked up a new shockwave 26!
Collapse
X
-
32" carbon rivercat single 4s 102mph, 27” mini Rivercat 92mph, kbb34 91mph, jessej micro cat(too fast) wasComment
-
Runs solid and doesnt look like a "Toy" anymore..................its all grown up.NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE:http://forums.offshoreelectrics.com/...est!&highlight=
Comment
-
I just wanted to say, I called pro boat and talked to a really nice guy. He's sending me a new flex and collet. No complaints there! As always, awesome customer service. I wish I could say the same about the one and only and last dealing I had with aqua craft. Kudos pro boat!32" carbon rivercat single 4s 102mph, 27” mini Rivercat 92mph, kbb34 91mph, jessej micro cat(too fast) wasComment
-
32" carbon rivercat single 4s 102mph, 27” mini Rivercat 92mph, kbb34 91mph, jessej micro cat(too fast) wasComment
-
Thx, me too! You do know this is an rtr? It came looking cool like that! I did some strut and flex tube modifications and a motor and esc swap. I'm going to add some foam to the front of it and run it on 4s next. Should be in the 50's if it don't chine walk. I ripped out the stock drive tube as they has problems locking up from the factory. I went to my hobby shop the other day and they had one just like it apart on the counter. Evidently there's a problem with them, every one they have sold seized the flex shaft in the first or second run. Well rather going though that again, I modified it and put a real flex shaft in it..3/16. It made it through a thrashing in my kids hands today and some "speed" runs lol.32" carbon rivercat single 4s 102mph, 27” mini Rivercat 92mph, kbb34 91mph, jessej micro cat(too fast) wasComment
-
32" carbon rivercat single 4s 102mph, 27” mini Rivercat 92mph, kbb34 91mph, jessej micro cat(too fast) wasComment
-
Yea I know.... it's not really an rtr because of that in my opinion.i got my replacement shaft from proboat pretty quickly but the fact that mine isn't an isolated problem kinda concerns me. O well, when I sell this one, someone is going to get a much better boat than from the factory that's for sure.32" carbon rivercat single 4s 102mph, 27” mini Rivercat 92mph, kbb34 91mph, jessej micro cat(too fast) wasComment
-
I wonder how the stock motor would have run on 4s ?
and what kv is that Castle you put in ?.NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8sComment
-
The castle is 2400kv. Stock motor is 2000kv. It would probably do fairly well with the stock motor. I may even try it if the castle I'd too much on 4s. I was afraid the boat would lean badly to one side with the 4s pack but as a matter of fact I threw it in the bath tub tonight to see how it works sit and it's just barely leaned it one side. It think it'll be ok. I also added alot more epoxy to it this evening.....where the platform is glued in, it's only glued in the front and rear. I did the sides also and added some to the front an rear. A guy I know has one and he said his detached in the first few runs. I want this to be a trouble free, but quick if i want it to be, boat that my kids can run. It's really for my 5 year old (he said I could have his blackjack 9 in trade for it lol) but it's a tad fast for him. I can throw a 2s pack in it tho and it's will be fun for him.32" carbon rivercat single 4s 102mph, 27” mini Rivercat 92mph, kbb34 91mph, jessej micro cat(too fast) wasComment
Comment