WTB FE Rigger Hull, Hardware, Servo installed, possibly motor too!

[JMSCARD]

I am looking for a Rigger to play with... Electric Only.... basically all ready for my electrics as I like to play with my toys rather then build them (I work 70 hours a week)

Prefer a Hull with Hardware and if servo is already there and lined up for the boat thats great too..... if someone has one with a motor set up for the boat that is fine too.... I don't need any esc's though as I have plenty (4 turnigy 180's sitting doing nothing)

[old guy]

What are you looking for a small one or a medium sized one and how much are you willing to spend? the more you spend the better you get.
Old Guy
I have 2 but need to know what you want and how much you want to spend

[JMSCARD]

Give me both options:) I don't want to race them but I do want it to be very fast:) and handle well.... I don't want to spend a ton of money.... Let me know what u have and the asking price and condition I will let you know if I'm interested.... Also let me know what kind of power you recomment (motor/lipo voltage) so I can see if I have the proper equipment for them..... I should have plenty of lipos.... I have wayyyy to many... I have larger esc's too if the rigger requires as hv esc:) and I have a 2250 lehner 12t among other fiegos sitting around... Thanks again!

[detox]

Here are pictures of Rigger Insanity

[MRotch]

What are the dimensions on that Rigger, Detox?
What are the specs on the gear - motor/esc/battery/prop?

Thanks much,
Mike

[detox]

What are the dimensions on that Rigger, Detox?
What are the specs on the gear - motor/esc/battery/prop?

Thanks much,
Mike

OSE sells this kit . Here are the deminsions.

http://www.offshoreelectrics.com/pro...igged-insanity

It has Solinger hardware installed with Octura Collet and Wire drive, SV 27 motor/esc, Auquacraft servo. You add prop, 4s lipo and go. I will also include Auquacraft AM radio and receiver.

[JMSCARD]

How many dollars shipped to me detox? You can keep the radio.. I am 2.4 ghz.... Thank u for the offer of throwing it in tho....

[detox]

$220.00

[JMSCARD]

What is the speed of the boat with the sv27 power pkg... What prop does the boat work well with?

[detox]

What is the speed of the boat with the sv27 power pkg... What prop does the boat work well with?

I never did alot of prop testing using SV27 combo. I am guessing 45mph using Octura m445. Will go faster using a better matched prop. To go faster you will need atleast the 540 8XL motor.

[JMSCARD]

I have ALOT of 40-60 mph boats.... I am honestly am wanting a rigger because I want it to be silly fast..... I have a nemesis 10xl sitting around..along with a 9xl feigo... Also a bunch of turnigy 180 marine speedos.... You say to run it on 8xl... Will that get it to 70? I want it to really go.... Would you sell it less the sv27 esc/motor as I'm sure you know you could easily sell those two items quickly also... I just have no use for them because I want it to be much faster then 45mph.... I really want to scare the fish...:)

[detox]

Yes I will sell it less SV27 motor/esc. $180.00 shipped.

[detox]

You say to run it on 8xl... Will that get it to 70? I want it to really go....

No...You will need different combo. Not sure what you will need to go that fast.

[Chuck E Cheese]

i highly recomend the JAE 21FE. it is solid mid 50's on UL-1 set-up. if you want silly fast you are going to go with a 1415 or 1515 1y and then battery size is an issue in riggers. a 10xl needs to be 6s to be fast and from what i have seen in mono's they burn up unless it is a full saw set-up.

http://www.youtube.com/watch?v=jLg1qhhPU3E

[tth]

Here is my old Dumas Hawk 3.5 kit that I traded a while back. She ran solid 70+ every time out. Setup was Feigao 10xl, Etti 150 w/o bec, Poly RC lipos 6s 6000mah, it had Marine Specialites Hardware on it when I got it. She was a beast and the kit has good stiff wood to build with too. It was kind of a bugger in the corners but straits were a blur!!!! I have been thinking of the JAE FE kit but all my extra $$$ is going to the rigger in my avatar and also a new Skunkworks Twin Cat. I hope you enjoy the clip!!!