Results 1 to 3 of 3

Thread: Has anyone build one of these?

  1. Default Has anyone build one of these?

    Looking into building one of Doug Campbells 1/10th scale laser cut kits has anyone built the Thriftway version

    http://classichydros.com/#!/1-10th-S...tegory=4581162

    http://classichydros.com/10thScale3-viewdrawing.pdf

    6670
    "Our society strives to avoid any possibility of offending anyone – except God.”
    Billy Graham

  2. #2

    Default

    Jim,

    I have built this exact kit, see my post below. I am currently in the process of rebuilding the hull due to a run in with a floating pier. I had been working on trimming it out running 6S with a Leopard 1250KV motor using an X447 prop.

    At full speed the hull would hop off the water, and land, and continue to hop. The biggest change I had made was to cut out the air traps. I started out cutting off about 25% of the air trap to get the hull to settle down, which showed promos. I ended up completely cutting them off after several tests slowly cutting off a little at a time. The hull finely settled down.

    Once I get everything back together I hope to experiment with some prop selections and do a little racing here in District 12 this summer.

    http://forums.offshoreelectrics.com/...ished-now-what

  3. Default

    If I build one it will run on 4S and maybe have a little extra weight in the nose

    Sent from my Moto G (4) using Tapatalk
    "Our society strives to avoid any possibility of offending anyone – except God.”
    Billy Graham

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •